Search results for query: *

I have a nice and mostly complete stock bore 340. It has a 70 cast date but has a 73 vin and cast 4 speed crank. It includes the complete bottom end,360 heads and 340 air cleaner. It’s been in storage for years so it will need an over bore to clean it up. $1600 and pick up in Roselle Illinois 60172

I have a set of 67-up 4 speed pedals $275, 71 scamp complete bumper jack assembly $125. I prefer pick up in Chicago or you can use Speedee delivery if you’re in their area. I don’t have the free time to box stuff up really and get quotes. I’m in 60172 zip

I have a complete set up with pushrods, covers and hardware $175 pick up in Chicago or ship via Speedee delivery

I have a complete bumper jack assy for a 71 scamp. I prefer pick up in Chicago or shipping in Speedee’s territory

I’m looking for a v8 k frame,with sway bar would be nice,bb bars and super stock springs. The closer to Chicago the better. Thanks

I have a decent pair of used small block M/T valve covers that need some clean up $70 + shipping or pick up is welcome,add 3% for PP. They look like they have been notched for a high rise intake already.

I have a nice set of used KB191-.030 pistons with rods. They came in a package deal and are a bit more than I need for my engine. It doesn't look like they were used for very long. There is one that kissed a valve squarely but didn't cause any damage $250 shipped or pick up in Chicago is...

I have a nice barely used Offenhauser intake manifold for /6 engines. It is missing the carb adapter. What you see is all I have $125 + shipping,add 3% for PP

I have a nice used 392 oil pan and pick up that works well in early A body 360 swaps but also for the later ones $75 + ship,pick up is welcome in Chicago,add 3% for PP

I have a nice barely used Offenhauser intake manifold for /6 engines. It is missing the adapter. What you see is all I have $175 + shipping,add 3% for PP

I'm on a roll. I have mostly finished my 67 Valiant so I'm cleaning house on all of my extra and unneeded parts. PR of small bolt A body axles with retainers and lock $100 obo,prefer pick up SB oil filter plate $20 carb linkage studs $20 stock bellhousing bolts $10ea pic 67-72 trans mount...

65 B body 8 3/4 3.31 gear (I think) $250 pair of 920 closed chamber heads $100 60's small block timing tab with bolts $20 steel 273 crank $75 slant 6 PS stuff 360 pan and pick up (392) good for early A swaps $75 slant 6 air cleaner $25

360 oil pan (392) and pick up,perfect for early A 360 swaps but fits all car chassis $100 slant 6 PS set up minus box $40 60's small block engine brackets $40 neutral balance balancer,not dry rotted $40 2x 67-72 torsion bar frames,nice shape $100ea headlight retainer rings $30pr 65-7 B...

Doing some more garage cleaning in Chicago. unmodified Holley Street Dominator intake $150 M/T valve covers $100 MP air cleaner and valve cover package,still pretty new $225 Shipping extra,add 3% for PP and pick up is always welcome

#3691909 73-up 26" v8 radiator shroud with bolts $125 which should fit other A bodies up to 76 with 26" radiator

392 oil pan and new pick up for putting a 360 in your early A $100 360 balancer $30 shipping extra and pick up is always welcome,add 3% for PP

I have two trans mounts that I'm not going to use 67-72 $20 73-6 spool mount $35 and a poly trans mount insert $20 shipping is extra,add 3% for PP or pick up is welcome

I have a nice used electronic distributor for /6 $40 + ship,add 3% for PP heat stove and pipe $25+ ship,add 3% for PP 60's pcv and breather $25+ ship,add 3% for PP

I have a complete Super Six set up. The only thing missing is the air filter lid. I don't have time to box it up so I'd prefer pick up in or near Chicago. $350 and no I won't part it out. Thanks

I have a complete axle to axle 8 3/4 removed from a 65 Belvedere. It needs studs on the LH side,the drums are toast $350. I prefer pick up in Chicago

Round #2 of my clean out in Chicago,pick up will be easier on me or if it fits in a flat rate box, the shipping is on you. Dana 60 to 727 driveshaft for 108 wheelbase A body with yoke $125 nice factory 360 car pan (392) and new matching pick up $75 Small block spool mounts,$75 for all 3 with...

I have a complete factory small block windage tray with bolts. $75+ shipping,add 3% for PP fee's or pick up is welcome in Chicago and no I won't split it up.

I have a 71 318 long block on a stand in my storage garage that I'm never going to use. It ran pretty good before it was pulled in favor of a BB. Come and get it on a weekend in the IL 60638 zip. There is no acc's or intake. It's from the heads down and water pump back.

I have no idea what it fits but it looks to be in good shape with pulley,missing cap $35+ ship,add 3% for PP Extra bracket with pulley $10 + ship and 3% for PP if shipped seperate

This came in a box of stuff I picked up and not sure what it's from or what it fits $40 + ship,add 3% for PP

I have 2 small joint 727 slip yokes $40ea + ship,add 3% for PP

I can't locate any #'S on them but $30 pr + ship,add 3% for PP

slant 6 air cleaner assy top/bottom for 1 bbl carb $25 + ship,add 3% for PP

This came in a package deal that I picked up. It was in a 10 sec car that didn't hold up well and sheared the pin off. They do sell the pin repair kit for it $250 + ship and add 3% for PP. I kept the 4.10 gears. I'm not sure on the spline but will find out...

I have a good used (392) 360 pan and pick up $40 + ship+ add 3% for PP