[Found!] 11 X 2-1/2 Backing Plates

[RogerRamRod]

Looking for 11X2.5 Rear Drum Backing Plates.
Here’s how to measure Thanks to 72bluNblu

Set the backing plate flat on a bench. You'll need to hang the bottom 1/3 of the backing plate off the edge of the bench so that the mounts for the e-brake cables don't keep the backing plate from sitting flat. It isn't much, but they do change the measurement. Then, measure from the bench to the top of the backing plate through the center hole (for the axle) in the backing plate.
If you get ~1.75" or a bit more, you have 11x2.5" plates. They should be just about 12-1/4 across.

 

[rustycowll69]

I've found those on early 70 c-body wagons and 1/2 t trucks.

 

[72bluNblu]

I may have an extra set. I'll send you a message

 

[badlilred79]

Got drums and plates

 

[RogerRamRod]

Willing to sell just the plates? I have all 2.5" hardware & drums are in great shape. 72blu is checking to see if he has a pair of plates

 

[badlilred79]

Which size 10or 11 yes I'll sale the plates 85.00plus ride