1967 Dart GT fender tags

-
67_Slimer

67_Slimer

Real Hot Rods don't shift themselves.
Joined
Sep 28, 2021
Messages
117
Reaction score
179
Location
USA New England
I'm looking for an exact placement for my Dart GT fender emblems on my 1967. The car was originally a GT but now there's a fiberglass nose on the car but i want to keep the nostalgic look to the car. I looked for any info but besides pics I couldn't find any exact info. Any info or links would be a great help. I can always just compare to pics but I will if there's no measurements. Thank you for taking a look at my thread.
 
Last edited:
I have a 67 Dart GT with the original fender tag in place. If you'd like I can run over to the garage I keep it in and take measurements in the next day or so
 
wawarnick said:
I have a 67 Dart GT with the original fender tag in place. If you'd like I can run over to the garage I keep it in and take measurements in the next day or so
Click to expand...
OMG that would be so awesome. I don't want you to go out of your way. Thank you so much.
 
Remember to keep your hands at 10 and 2.
67 dart #2
My other 67 dart #1 the 10 is spot on but the 2 is closer to 2.125.

PXL_20240403_022740017.jpg


PXL_20240403_022731296.jpg


PXL_20240403_022709988.jpg


PXL_20240403_022700777.jpg


PXL_20240403_022647654.jpg
 
Horizontal measurement taken at the style line

Watch the reinforcing rib behind the fender. The holes should NOT go through it.


Using the style line as a linier reference I get from the rear edge of the fender.

4 5/16 top hole center

4 3/8 bottom hole center


from the peak of the fender to the top hole center 7"

At the style line... Rear of fender to rear of emblem (not holes) is 3" on the nose.

(Btw the V8 emblem holes are different side to side)

NOTHING TO SCALE IN THIS SKETCH


1712167605544.png





PXL_20240403_173109409.jpg


PXL_20240403_173117819.jpg


PXL_20240403_173220194.jpg


PXL_20240403_173226780.jpg

F
 
Last edited:
Dana67Dart said:
Horizontal measurement taken at the style line

Watch the reinforcing rib behind the fender. The holes should NOT go through it.


Using the style line as a reference I get from the rear edge of the fender.

4 5/16 top hole

4 3/8 bottom hole

At the style line... Rear of fender to rear of emblem (not holes) is 3" on the nose.

Btw the V8 emblem holes are different side to side



View attachment 1716230980

View attachment 1716230981

View attachment 1716230982

View attachment 1716230983
Click to expand...
I don't know how to thank you!! So much appreciated!!
 
It's just sitting there right now with no trim, if you need other info hit me up
 
You must log in or register to reply here.
-

Back
Top