I have decided to part my 67 Dart GT project car out. I have too many things going on and don't have time to finish anything. Here is the info. I do NOT want to ship large items like rear end seats dash..... Buyer will pay all shipping or pick up is preferred. Pay Pal only. I will upload any requested photos you need per request.
Car 1967 Dart GT
Roller
I DO NOT have a title for this car. I was going to get one via the Vermont loophole but that has been shut down. I will sell it with a bill of sale to anyone wanting to purchase it.
No build sheet, no fender tag. I have done the DMV search and the car does not show up as stolen or any non sense like that.
I have done a lot of sheet metal work to the car. . The quarters will not be installed so refinishing will be easier inside the trunk and so forth.
The car is now a roller on a dolly in the front but comes with a lot of parts.
What you will get.
Body
Two hoods
Deck lid
Front and rear seats
Dash
Steering column
K member with front suspension
Grill
Tail lights (not good condition)
Front and rear bumpers with brackets
A/c heater box with all a/c parts that were on the car when I bought it
One extra door I think it is the driver door
All bolts and fasteners that are marked
Any bolt on part that I took off like latches and such
Two front rims with junk tires on ralley wheels No trim rings
I have a TON of parts that will be sold separately from the car. A package deal could be had for everything I had to build the car. This was going to be a 440 car.
Body and above parts $5000
Here is a build thread link to show the metal work that has been done. This car is basically rust free now with the amount of sheet metal work I have done. I do body and paint for a living so the car has been done correctly. There is close to 8k in AMD sheet metal alone.
Project "Pig Pen" 1967 Dart Gt
Car is located in Janesville Wisconsin 53548
Please message me here if you are interested.
Thanks Fabo.
Part out price. Body only $3,000 with remaining sheet metal.
Fenders rust free 67 Fenders. $500 each or $900 for the set
Tail panels (finish panel) 2 to choose from. $350 for one $550 for the better one
Cold case 26 inch radiator new in box $350 no shipping
A body 8 3/4 rear end with new un-used springs from Mancini racing $1,000- Have a Dana power lok sure grip for $350 or will add to this rear end package for $250
Stainless rocker molding set -good condition needs restoration. $350 Rocker clips $50
Fender marker lights... multiple sets including some NOS one's $300 for all
Front buckets Need covers- $400 No shipping
Rear seat needs cover $150 No shipping
A/C set up from car- no condenser just pipes and heater box $200
Used door trim panels $75 set of 4
440 bare block- $400 with iron heads $350 without heads No shipping
Upper body trim full set with new clips $500 No shipping
New fuel tank $75.00
67 Dart grills good condition have multiples $100 each
Two hoods $50 each
New AMD full quarters $400 each
Doors $50 each
Tail lights $25 not great shape
BB 727 apart for rebuild $75
I have a lot of other parts I will add this weekend when I get time to sort through all of it.
Car 1967 Dart GT
Roller
I DO NOT have a title for this car. I was going to get one via the Vermont loophole but that has been shut down. I will sell it with a bill of sale to anyone wanting to purchase it.
No build sheet, no fender tag. I have done the DMV search and the car does not show up as stolen or any non sense like that.
I have done a lot of sheet metal work to the car. . The quarters will not be installed so refinishing will be easier inside the trunk and so forth.
The car is now a roller on a dolly in the front but comes with a lot of parts.
What you will get.
Body
Two hoods
Deck lid
Front and rear seats
Dash
Steering column
K member with front suspension
Grill
Tail lights (not good condition)
Front and rear bumpers with brackets
A/c heater box with all a/c parts that were on the car when I bought it
One extra door I think it is the driver door
All bolts and fasteners that are marked
Any bolt on part that I took off like latches and such
Two front rims with junk tires on ralley wheels No trim rings
I have a TON of parts that will be sold separately from the car. A package deal could be had for everything I had to build the car. This was going to be a 440 car.
Body and above parts $5000
Here is a build thread link to show the metal work that has been done. This car is basically rust free now with the amount of sheet metal work I have done. I do body and paint for a living so the car has been done correctly. There is close to 8k in AMD sheet metal alone.
Project "Pig Pen" 1967 Dart Gt
Car is located in Janesville Wisconsin 53548
Please message me here if you are interested.
Thanks Fabo.
Part out price. Body only $3,000 with remaining sheet metal.
Fenders rust free 67 Fenders. $500 each or $900 for the set
Tail panels (finish panel) 2 to choose from. $350 for one $550 for the better one
Cold case 26 inch radiator new in box $350 no shipping
A body 8 3/4 rear end with new un-used springs from Mancini racing $1,000- Have a Dana power lok sure grip for $350 or will add to this rear end package for $250
Stainless rocker molding set -good condition needs restoration. $350 Rocker clips $50
Fender marker lights... multiple sets including some NOS one's $300 for all
Front buckets Need covers- $400 No shipping
Rear seat needs cover $150 No shipping
A/C set up from car- no condenser just pipes and heater box $200
Used door trim panels $75 set of 4
440 bare block- $400 with iron heads $350 without heads No shipping
Upper body trim full set with new clips $500 No shipping
New fuel tank $75.00
67 Dart grills good condition have multiples $100 each
Two hoods $50 each
New AMD full quarters $400 each
Doors $50 each
Tail lights $25 not great shape
BB 727 apart for rebuild $75
I have a lot of other parts I will add this weekend when I get time to sort through all of it.
