[FOR SALE] 1970 340 valve covers

[4spdragtop]

I had these up for trade, but are now for sale outright. Needs blasted/cleanup and 1/2 of 1 tab is missing, see my finger. Everything else looks good with no dents dings and all looms/clips are there.
$350 US obo plus the ride from Ontario
Thanks
Steve

 

[4spdragtop]

No problem, 340 covers have a taller loom on drivers side to get around the 4bl carb. Wire loom(cupped) on pass side sits higher up.

Your right,

Sorry to run over your sell thread.

Thought you might be able to tell me what a 70 340 valve cover has that is different,

 

[Mtrhead]

Passenger side has the infamous heat shield for wire harness like the hipo 273....these are only covers that come with that stuff...thats how to spot 340 covers...all the other covers are for 2bbl carbs ..they didn't need tall looms to clear linkage for 4bbl....

 

[4spdragtop]

Will also entertain a trade for a steering wheel like this.

 

[4spdragtop]

$350 shipped anywhere in Canada or lower 48.

 

[4spdragtop]

$325 shipped, or trades??

 

[4spdragtop]

I just discovered the rails have been slightly modified to fit aftermarket intake
$250 plus the ride....

 

[clayton d glasscoe]

Passenger side has the infamous heat shield for wire harness like the hipo 273....these are only covers that come with that stuff...thats how to spot 340 covers...all the other covers are for 2bbl carbs ..they didn't need tall looms to clear linkage for 4bbl....

I NEED THEM TO CLEAR MY ROCKERS

 

[4spdragtop]

Pm sent

I NEED THEM TO CLEAR MY ROCKERS