Spin'em75
Well-Known Member
2 complete sets of door panels. (1) 69 GT hardtop front and rear panels. One door panel has a slight nick at the bottom (pictured). (2) 1971 Swinger hardtop front and rear panels. These were green but I dyed them black. They got a little scratched over the years and could use a redye. Vinyl is lifting a little in areas around the edges on both sets but nothing heat and glue couldn't fix. I'm betting they came from the factory that way anyway. Selling as driver quality panels only but they are in reasonably good shape with no water damage. $150 per set or both sets $250 plus you pay shipping. Payment with USPS MO.
I used vinyl dye. I did this probably 25 years ago. Was going to use them in my 71 Dart but now years later i decided to go with new panels. When I did them I did as instructed by scrubbing them with warm soapy water, then rinsed them, let them dry and did several light coats. 25 years or so later they have gotten moved around and now have slightly marred surfaces but could be resprayed again and would be fine for a driver.
I used vinyl dye. I did this probably 25 years ago. Was going to use them in my 71 Dart but now years later i decided to go with new panels. When I did them I did as instructed by scrubbing them with warm soapy water, then rinsed them, let them dry and did several light coats. 25 years or so later they have gotten moved around and now have slightly marred surfaces but could be resprayed again and would be fine for a driver.
Last edited by a moderator:
