[WANTED] 360 core builder in or near Colorado springs, Co

[Princess Valiant]

Looking for a 360 engine. Tired runner or core builder. In or around Colorado springs, Co.

What's out there ?

 

[408 swinger]

Too bad you're not closer. I have two complete Magnum 360-s that would be CHEAP! Good luck with your quest!

 

[j par]

Call your pick and pull close to you I've seen plenty of Magnum Motors there. I checked on them back when my son talked about a motor for his Power Wagon...

 

[Princess Valiant]

Call your pick and pull close to you I've seen plenty of Magnum Motors there. I checked on them back when my son talked about a motor for his Power Wagon...

I have seen random posts about magnum motors but never paid attention. I figured I would find some kind of 70s 360 but maybe I should start paying attention to the magnum engine talk.

I assume they have more power and some extras ??

 

[j par]

First off Pick-n-Pull will give you a 6-month warranty! Who on here is going to give you that for used motor? You need an intake manifold and a electric fuel pump. You'll have roller lifters so you can just use cheap oil...

 

[j par]

Me personally I can hardly wait to find perfect project car or truck to put one in...

 

[RustyRatRod]

I have seen random posts about magnum motors but never paid attention. I figured I would find some kind of 70s 360 but maybe I should start paying attention to the magnum engine talk.

I assume they have more power and some extras ??

You should get out of the past. Find you a decent Magnum core while there are still some to be had. Don't you have an LKQ around there? They should have some 5.9 Magnums. With a warranty, so you know you'll get a good core.

 

[j par]

You should get out of the past. Find you a decent Magnum core while there are still some to be had. Don't you have an LKQ around there? They should have some 5.9 Magnums. With a warranty, so you know you'll get a good core.

They have Pick-n-Pull yards there in Denver. I've been to one with my son and got a seat out of a Ford truck for his Power Wagon. It cost me 45 bucks. He struggled and struggled to get the back bolts out until I finally had to go in and get it out because we had my grandson who couldn't go inside. I slide the seat forward LOL easy cheesy. He was trying to reach underneath the seat lol