moparraceman
Well-Known Member
never assembled 1972 360 block bored .070 over gives 372 cu in all parts new in the boxes block has been bored,cyl honed,line honed,crank ground .010 .010 rods resized with arp bolts.every thing balanced encluding crank balancer and flex plate also new . new KB hyper 10.5-1 pistons ,hasting rings .new rod-main-cam bearings.new timing chain,and oil pump drive.also milodon 7 qt pan with pick up ,windage tray and mounting bolts also new chrome pan bolts also front alum timing cover cleaned and painted. will also encluded a set of new pro comp alum heads,2.02-1.6 s/s valves ,bronze guides,3 angle valve job,65 cc ,with head stud kit ,gasket matched,upgrades 10 degree locks and retainers better crane valve springs to 650 lift ,heads were tore apart ,checked and all tolerance reset by a head man also new set of streetmaster 1.6 roller rockers from jegs .single plane gasket matched intake,comp solid lifter cam 540 lift 244/252 duration ,electronic distributor and 9mm wires ,and a good used 750 holley carb $4500. firm for everything mansfield ohio have over $3000. in the heads
Last edited:
