596 casting heads, 2.02 1.60 stainless valves, m1 intake and roller rockers

[moturbopar]

Selling my freshly rebuilt 596 casting heads, fresh 3 angle valve job with bowl hog. New 2.02 1.60 stainless valves, new guides, and seals. Mild performance valve springs. Heads are ready to be ported, or run as they are. Heads measure 70CCs. Good used M1 single plane intake, and new Procomp stainless roller rockers 1.5 rockers.
$750 for all

Also have 360 pistons for sale http://www.forabodiesonly.com/mopar/showthread.php?t=151698

 

[moturbopar]

 

[1wild&crazyguy]

Do they have hardened seats?

 

[64physhy]

PM sent on intake

 

[moturbopar]

Stock seats.

i want to try and sell as a package first, but might sell intake seperate if it doesnt sell soon.

 

[64physhy]

Ok. Dibs on the intake if you separate it. Do you have pics of the intake?

 

[72duster72]

if had harden seat they would be sold

 

[moturbopar]

Well looking over the work done on the head it does have hardened seats installed.
And that is NOT a crack in the guide its just a peice of lint.

 

[1wild&crazyguy]

You lap the valves and see how the 45* is, check for chatter/seat concentricity.

 

[72duster72]

what lift can these heads take? what is the difference of these heads and x or j heads

 

[RuloGTX]

Hola: I on the Procomp rockers if you separate it