[SOLD] '64 - '66 TTi Headers

[Harpo]

TTI Headers for Barracuda/Valiant automatic trans, 273 - 360LA. New, never installed, never run. Thermal coated, still wrapped. Located in Riverside County, Southern California. Must pick up, no shipping.
$600.00 firm.

 

[MuuMuu101]

Are these made for 273/318 ports or 340/360 ports? TTI has a note about that on their website. I'm assuming they're long-tube headers.

http://www.ttiexhaust.com/Category-ClassicHeaders/340-636A/TTi636A.htm

 

[Harpo]

ok, here's some pics

 

[MuuMuu101]

If I'm not mistaken, the exhaust ports are about 1.75" tall? That would make them 340-360 heads.

 

[prostreeter9]

Hey MuuMuu101 what are the port sizes on a 318?

 

[MuuMuu101]

Hey MuuMuu101 what are the port sizes on a 318?

IIRC the 273 and 318 port sizes should be the same. Same goes for the 340 and 360. Looking at them again, it's kind of hard to tell the port sizes using a tape measure from the pictures. A caliper of some sort should be used.

#2658920 {1966 and 1967 } '273' Castings

Intake Port.......... 1.05" Wide x 2.07" Height
Volume............... 124 CC's

Exhaust Port....... 1.14" Wide x 1.59" Height
Volume.............. 61 CC's
---------------------------------------------------------

#2531984 'X' {1968 thru 1970} '340' Castings

Intake Port.......... 1.16" Wide x 2.27" Height
Volume............... 160 CC's

Exhaust Port........ 1.25" Wide x 1.75" Height
Volume............... 70 CC's

From: http://www.forabodiesonly.com/mopar/archive/index.php/t-303578.html