67 restomod dart twin turbo

[Matts440]

I'm in the process of doing a restomod on this car, taking everything apart cleaning and painting stuff inside the doors that show signs of surface rust and just cleaning it up. Might have seen my thread in force induction section but I'll load some pic here too.

 

[Matts440]

Here are some pics of my so far progress

 

[Matts440]

Some more pictures

 

[Matts440]

I do have a question for those that go deep into the restos, I'm looking to see if there is anything to replace the seals that hold the glass in the frame of the vent and rear quarter glass, also the felt on each side of the door glass. Do you use the factory old stuff or replace it and with what?

 

[dano]

I do have a question for those that go deep into the restos, I'm looking to see if there is anything to replace the seals that hold the glass in the frame of the vent and rear quarter glass, also the felt on each side of the door glass. Do you use the factory old stuff or replace it and with what?

Door seals and felts you can get. I think you can now get the wing window too.

Look at Softseal:

http://www.soffseal.com/store/main.aspx?p=PictureListBody&c=DODA

There are others too, most Mopar restoration suppliers will have them.

I suggest you leave the seals installed until you replace them so you know how they went and in what order. Adhesive is involved is some places so a factory manual is handy too.

 

[Matts440]

Awesome thanks, I haven't removed anything out yet till I do get new ones.

 

[Matts440]

does anyone know where I can get a new Quarter glass for my car? Im in the process of removing my glass from the frames since I have new glass seals coming, go my last quarter glass i was working on rt rear, removed part of the seal to try and get the glass out, came out this morning and the glass shattered sitting on the floor of my dart on the carpet dont know how that happened.

 

[skypower]

That sucks I'm sure someone will post up with one to help you out.