'69 Barracuda Front Spring Hanger
- Thread starter Daves69
- Start date
-
Daves69
Well-Known Member
Thanks but I have a set of hangers. Not exactly sure what application they can/will fill.
I really need to know the dimensions.
I will measure for you, get back to you soon.
Daves69
Well-Known Member
Thank you Lelo!
All measurements are approximate.
A - 1"
B - 3 1/8"
C - 7/8"
D- 1 17/32"
E - 1 3/4"
Not sure but I think these measurements should be the same on all models. Where it sets the spring is what matters.
Spring Hangers | AR Engineering
Hold on, I see a different reinforcement plate for A and B bodies.
A - 1"
B - 3 1/8"
C - 7/8"
D- 1 17/32"
E - 1 3/4"
Not sure but I think these measurements should be the same on all models. Where it sets the spring is what matters.
Spring Hangers | AR Engineering
Hold on, I see a different reinforcement plate for A and B bodies.
Last edited:
Daves69
Well-Known Member
Excellent Lelo, you gave me exactly what I needed to know. These will work for an Abody.
Thank You!
Glad to hear it!
-
