727 trans bushing part

[bcuda1$3$]

Can anyone give me a part number on this bushing? 1974 727 . First time build and I can’t seem to find correct one.

 

[Desoto291hemi]

Are you asking about the bronze bushing inside the hub ?

Tommy

 

[bcuda1$3$]

Are you asking about the bronze bushing inside the hub ?

Tommy

Yes

 

[Desoto291hemi]

Okay,,,is it worn out or damaged in any way ?

Very rarely do most of those bushings wear in the 727 ,,,,unless it’s very high mileage and seen harsh service .

Tommy

 

[Desoto291hemi]

Have you examined the pump rotors themselves,,,that’s much more critical .

Tommy

 

[bcuda1$3$]

Yes I am actually near the end of the rebuild and when I pushed this one bushing in I scratched it. Transports warehouse isn’t answering. I got the master rebuild so it was all in there but boogered this one.

 

[bcuda1$3$]

But yes the pump gears have good clearance.

 

[Desoto291hemi]

Okay,,,I understand .

How bad is the scratch,,,,,is it damaged really badly,,,,or can it be smoothed out with a piece of Scotchbrite ?

If it’s only a scratch,,,,that won’t compromise the load capacity of the bushing .

Tommy

 

[mopowers]

A-727 Recation Shaft Bushing‚ 1967 up 727-22005A