Duster 72
Well-Known Member
I have a 74 dodge w100 that I've converted over to a 3/4 ton with 1972 axles. Has a divorce t case 727 440 bored 40 over speed pro pistons 10.1 compression rv cam with crower lifters flat tappet headers Eddy performer intake msd box one wire gm Alt milodon deep pan. New 285 75 r16 mt 90% one year old full spring 4" suspension lift new booster and master cylinder. Newer tow package and brake controller. This has been my daily for the last few years. Motor has less than 5k miles on it as I work 5 miles from home.
The bad is it needs a steering box and brake work also wiring needs to be cleaned up. 4 wheel drums. I do have a set of 3/4 Chevy axles I was going to use for the disc conversion that go with it. I have a piece of metal tech screwed to the driver's floor because there's a huge whole.
Looking to sell because family is getting bigger and I have no use for a ex cab anymore
The bad is it needs a steering box and brake work also wiring needs to be cleaned up. 4 wheel drums. I do have a set of 3/4 Chevy axles I was going to use for the disc conversion that go with it. I have a piece of metal tech screwed to the driver's floor because there's a huge whole.
Looking to sell because family is getting bigger and I have no use for a ex cab anymore
