8 3/4 rear-end swap into 1963 dart

[schlockfink]

I found a 8 3/4 rear end out of a 1966 barracuda. Will this guy bolt right up to my 63 dart wagon? Will I have modify anything?


Paul

 

[63dartman]

If it came out of the 66 and no mods were done to the 66 it will bolt right in. Of course you need all the hardware and shock plates too.

 

[cosgig]

And a new shorter driveshaft, unless you snagged that also!

 

[Keith Mopar]

I think the drive shaft from the 66 is a slip yoke and the 63 will be a ball and trunion. So either way you have to do some cutting.

 

[Snake]

You may need a new set of tires as well.:burnout: