O oldkimmer FABO Gold Member FABO Gold Member Joined Nov 11, 2006 Messages 24,153 Reaction score 8,376 Location Kindersley, Saskatchewan, Jun 26, 2019 #1 What would good rockers to run on a 440 budget build. Cast heads. 10-1 compression. Hyper pistons, stock rods and crank, balanced assambly. .550 lift cam. 6000 max rpm. Thanks. Kim
What would good rockers to run on a 440 budget build. Cast heads. 10-1 compression. Hyper pistons, stock rods and crank, balanced assambly. .550 lift cam. 6000 max rpm. Thanks. Kim
fishmens67 FABO Gold Member FABO Gold Member Joined Nov 10, 2012 Messages 18,596 Reaction score 30,504 Location idaho Jun 26, 2019 #2 PRW stainless.
MomsDuster Well-Known Member Joined Apr 17, 2016 Messages 5,043 Reaction score 6,056 Location Vacaville Ca Jun 26, 2019 #3 Talk to Mike over at B3racing engines. aka B3RE here at FABO. He can set you up with the geometry correcting kit also.
Talk to Mike over at B3racing engines. aka B3RE here at FABO. He can set you up with the geometry correcting kit also.
O oldkimmer FABO Gold Member FABO Gold Member Joined Nov 11, 2006 Messages 24,153 Reaction score 8,376 Location Kindersley, Saskatchewan, Jun 26, 2019 #4 I was think of contacting him. Thanks. Kim
3 383Scampman Well-Known Member Joined Nov 24, 2013 Messages 1,827 Reaction score 1,060 Location New Hampshire Jun 26, 2019 #5 Comp or Crane for budget . Harland Sharp is best. Avoid off shore rockers like the plague .
RustyRatRod I was born on a Monday. Not last Monday. FABO Gold Member Joined Jun 7, 2010 Messages 104,967 Reaction score 102,697 Location Georgia Jun 26, 2019 #6 I like the old stuff. Isky, Erson, Crane, the ductile iron ones. Bulletproof.