Am I correct?

[moparsince60]

After a lot of double checking my old harness and the new dash harness, I'm 95% done installing the new harness but have one final question. I have a 1971 Demon 340 with the Rallye dash and factory air. The black/white wire I am holding comes out of the harness. The plug it going into comes from the add on harness you need if you have a/c. Does what I have done match what I am pointing at in the factory service manual? Thanks to everyone who has helped me on this in the past and in advance for helping me here. Hope everyone is doing well.

 

[WV64Signet]

 

[CRUZE 418]

I do not see an asterisk on that wire for a white tracer.

 

[moparsince60]

I do not see an asterisk on that wire for a white tracer.

I think I'm going to be okay. Thanks to your answer, it got me to look a little further. I traced the wire I was holding back to the panel behind the fuse panel and found out that wire goes to the a/c fuse position. Sorry for the blurry fusebox picture. Thanks for your help Cruze 418. Hope all is well.

 

[CRUZE 418]

All that counts is that you solved your problem!