axles

[dusterboyy440]

hey everybody so somebody told me that my axles would not hold up for the 10 second range, So i pulled them out of the shortened 8 3/4...they are 30 spline and small bolt pattern. The gears in the car are 455 or 456 whichever. Soo wat should i do so i can reach the 10's!!

 

[Demon416]

Contact these guys. They'll steer you in the right direction.

http://www.moserengineering.com/

 

[stroked 340]

hey everybody so somebody told me that my axles would not hold up for the 10 second range, So i pulled them out of the shortened 8 3/4...they are 30 spline and small bolt pattern. The gears in the car are 455 or 456 whichever. Soo wat should i do so i can reach the 10's!!

I've got a pair of the Moser's small bolt pattern 30 spline in my low 11's duster,holding up just fine,they also drilled and tapped them for large bolt pattern incase i ever change over:thumblef:give them a call for my money they're the best out there..

 

[rbdart]

I Have Seen These Axles Go 10.70's--10.80's That Were Narrowed And Backbraced Housings-pinion Snubber....but To Be On The Safe Side I Would Chk With Moser Or Mancini For Some Better Ones...i Got Mine From Mitchells Differentials Direct And Saved 80 Bucs....he Does Alot Of The Big Names Work....without The Middleman.....dan Mitchell....super Nice Fella To Deal With, Honest And Prompt.......