eric202006
Well-Known Member
does anyone know if the chearper headman b body headers will fit in an abody with an iron head tall deck (440). if so my pockets would prefer going down this route.
big block headers in a body
- Thread starter eric202006
- Start date
-
72ScampTramp
Scamp Tramp
Ive seen them fitting the low decks 383's and 400's but not the 440s. With out alot of work rerouting I doubt it.
shiifty_dart
Well-Known Member
I had 0 success with b bodys in my dart and went with schumakers but if you want proformance tti or mad dog headers are the way to go.
ps I have a 383 and had problems with b bodys but I dont havve the spool mount k frame my buddy has the spool mount with b bodys and they fit fine thats just my experince
ps I have a 383 and had problems with b bodys but I dont havve the spool mount k frame my buddy has the spool mount with b bodys and they fit fine thats just my experince
Keith Mopar
Mopar Nut
Here is a link to Big block dart on putting B body headers into an A body. They are on a low deck though. http://www.bigblockdart.com/techpages/BBody.shtml
Quote from BBD 'Standard Hedman B-body headers and a 383. Manual steering is required, and starter access isn't very good, but they fit with just a few dings.'
Quote from BBD 'Standard Hedman B-body headers and a 383. Manual steering is required, and starter access isn't very good, but they fit with just a few dings.'
-
