plumcrazy704406
Well-Known Member
Is there a chart that shows what the cyl. lbs on a gauge should be for various ratio pistons?
Eg: 318 - 9 to 1 is aprox 150lbs
thx
Eg: 318 - 9 to 1 is aprox 150lbs
thx
compression
- Thread starter plumcrazy704406
- Start date
-
dgc333
Well-Known Member
That number will also vary with the cam so there is no real way to make a chart.
1wild&crazyguy
Banned
though you could 'by means of over lap' show the bleed off effects per 2*
-
