[WANTED] Dana 60

[505dart]

looking for a Dana 60 for my duster. Preferably 4:10 gears, spool, aftermarket axles but will consider any. Located in se mi. Thanks

 

[sscuda]

You may want to be a little more specific.

Width - axle flange to axle flange

Offset - 1 3/16ths is the norm

Braced - yes or no

Accessories - such a wheelie bars, coil over mounts, etc

 

[505dart]

Anything from stock width to 3" narrower on each side, brackets don't really matter but it's going in a leaf spring car with the springs 3" inboard