[WANTED] Drum brake parts 8.75

[Mopar92]

Need basically a parts kit for each side to compete my 8.75 rear axle. Need all the parts besides springs and shoes. Need everything else.

 

[68original]

Rock Auto or NAPA should have everything you need.

 

[Mopar92]

I couldn't find the cross bar and a few odd bits on rock.

 

[halifaxhops]

What size? I have some 10" off a 7 1/4 should work.

 

[Oldmanmopar]

Parts are different for big and small bolt rears.

 

[halifaxhops]

I thought the p brake stuff was the same?

 

[Mopar92]

8 3/4 bbp 11x2" drums. Thanks.

 

[charger426]

I thought the p brake stuff was the same?

The cross bar isn't....ask me how I know....

 

[charger426]

8 3/4 bbp 11x2" drums. Thanks.

Then can be had for about $20 off eBay for new ones....more for used for some reason.

 

[Oldmanmopar]

Then can be had for about $20 off eBay for new ones....more for used for some reason.

New don't Hold the springs that will to hold them off the axle?

You say you have 11x2 big bolt. Were the axles drilled ? That size drum should be small bolt. Big bolt cross bars hit the axles on small bolt system. You can call me I should have everything here that you need for either. I will have to dig it out Call, Steve

 

[Mopar92]

I have a big bolt B body axle with 2" wide 11" diameter drums.

 

[charger426]

New don't Hold the springs that will to hold them off the axle?

It does, even comes with a new spring. I think its guys that have these old parts and think anything old is worth a bunch of money.

 

[Mopar92]

I could not find a complete kit anywhere. I've been doing some reading and it sounds like they made some B body 2 and 2.5's. I'll go back out with a tape measure and see Again.

 

[Oldmanmopar]

It does, even comes with a new spring. I think its guys that have these old parts and think anything old is worth a bunch of money.

I just replaced a set for a guy. The repops were rubbing the axles.

I price the parts I have at what it would cost me to replace them if needed. Some are not worth anything. I tossed all of the small bolt brake parts because I would have never used them.

There is not one small bolt brake part except hardware that will interchanges with big bolt brakes.

I kept two Big bolt sets for my car . Now my son is going to disc on all 4. If I can't get the time and shipping out of what I have I will just throw them in the dumpster where most of the parts went.

It don't matter to me if they sell or they get trashed. I did not keep these parts to sell. It was more of a save everything so I wouldn't have to buy or search for anything in the future for myself. It wasn't until lately I found I just saved to much

Comments like yours just makes us old guys that thought to save some things tell you all to get f##ked and and you all can keep on looking.

You are one of the reasons when asked if I have a part I don't even want to go look. Because cheap a$$ O's Like Y## never want to pay for my time.

 

[Mopar92]

Which is why I'm not bashful to pay a mans asking price nowdays. I chose not to keep the stuff. So I pay for it now and like it... Sorta. You e treated me fairly and I also appreciate your technical knowledge. That's hard to come by!

 

[krazykuda]

This kit has the strut bars for the parking brake:

http://www.manciniracing.com/rebrha1.html


10" parking brake levers:

http://www.manciniracing.com/pabracleset.html


11" parking brake levers:

http://www.manciniracing.com/pabracleset1.html

 

[hemi71x]

http://www.forabodiesonly.com/mopar/showthread.php?t=343035

Right here in the for sale section of the forum.
^^^^^^^^^^^^^^^^^^^

 

[1972 dodge]

I have the brake parts for 11" brake, used. $15.00 shipped

 

[acpat]

some have no idea how long and how many boxes, buckets, totes some of us have to look through to find things. lol