B3422w5
Well-Known Member
I have the eddie heads off my car for sale. They are still on the motor, wont get a chance to get them off for a few weeks.
They were just freshened up this past spring/summer at an extremely professional Mopar shop. Valley performance and machine, Ionia Mi..near me. Have trick flow( PAC) solid cam springs, machined locks and tool steel retainers
They have had minor tasteful porting done. My goal with these heads was to run 10’s easily on a stroker with a maintenance free deal. I have accomplished that. So my goal was to not run a big lift cam. These heads work perfectly on a sub 600 lift type deal. They have new 2.05 valves and fresh 5 angle valve job done at Valley. I am not hugely into flow numbers, but they peak around 272@550 lift. I remember Jack at Valley telling me the low lift numbers are very good and the heads would make good power. That was part of the reason for the upgrade to the 2.05 intakes. Good lower lift numbers. My cam is 565 gross lift
Anyhow, the heads are ready to bolt on and run, need nothing. They are the 360 style head, forget that part#
They went 11.26 on my 360. 10.77 on my stroker. Car weighs 3320 with me in it.
$1700$ am in West mi..would prefer pickup, but will ship if it comes to that
dont have any other pictures right now.they are on the car.
I am pretty well known in the Mopar community and picky about my stuff. These are really nice heads. Capable of more than i have used them for…big tube headers, better intake, yada,yada.
They were just freshened up this past spring/summer at an extremely professional Mopar shop. Valley performance and machine, Ionia Mi..near me. Have trick flow( PAC) solid cam springs, machined locks and tool steel retainers
They have had minor tasteful porting done. My goal with these heads was to run 10’s easily on a stroker with a maintenance free deal. I have accomplished that. So my goal was to not run a big lift cam. These heads work perfectly on a sub 600 lift type deal. They have new 2.05 valves and fresh 5 angle valve job done at Valley. I am not hugely into flow numbers, but they peak around 272@550 lift. I remember Jack at Valley telling me the low lift numbers are very good and the heads would make good power. That was part of the reason for the upgrade to the 2.05 intakes. Good lower lift numbers. My cam is 565 gross lift
Anyhow, the heads are ready to bolt on and run, need nothing. They are the 360 style head, forget that part#
They went 11.26 on my 360. 10.77 on my stroker. Car weighs 3320 with me in it.
$1700$ am in West mi..would prefer pickup, but will ship if it comes to that
dont have any other pictures right now.they are on the car.
I am pretty well known in the Mopar community and picky about my stuff. These are really nice heads. Capable of more than i have used them for…big tube headers, better intake, yada,yada.
Last edited:
