Hi thanks for letting me join your group. A retired automotive engineer of 22 years, Ford and Toyota

-

mike67tx

FABO Gold Member
FABO Gold Member
Joined
Sep 28, 2024
Messages
20
Reaction score
30
Location
texas
I recently purchased a 67 Baracudda formula s 2 door fast back. My reverse lights don’t work ,I,ve scanned some posts but is the bulb serviceable? I removed the light assembly but woory I’ll Crack the lenses if I try and separate? Appreciate your input
 
IIRC bulb comes out from the back.
If you discover bulb is not burned out, it could be a grounding issue. Their is a little nub on the housing that supposed to dig through the paint into the sheetmetal.
If all this seems kosher, it`s most likely the switch on the trans. If 4 spd? the aftermarket is garbage from new.
I don`t know the quality of the auto switches.
Worse comes to worse their`s always a toggle switch route.
 
Welcome Mike. :welcome: Please tell us that you weren't in the Ford exhaust manifold or 5.4 spark plug teams! DAMHIK!!!
 
Last edited:
Thanks I’ll check the ground. No nor power train mainly HVAC, which from FORD is nothing to brag about
 
IMG_8185.jpeg
 
Welcome to the site! It'll be nice to have someone from the industry who can vouch that this or that stupid design was because management has to save a few bucks, not because the engineers are stupid.

A Body Mopars are the most fun to work on and drive on a dollar to smile basis. Enjoy!
 

-
Back
Top Bottom