[SOLD] Intake bolts, Master cyl, Fuel feed, Moroso Gold Air breather

-
Status
Not open for further replies.

69FBCuda

Stand back 10' for your viewing pleasure & Safety
Joined
Aug 28, 2014
Messages
4,568
Reaction score
2,154
Location
Florida
Rating - 100%
28   0   0
Contact seller
Mr. Gasket Hex Head Intake Manifold Bolt Kit(new) PN 955G $7

Master cylinder e71258 (Made in USA) drum/drum -needs rebuild $8

Fuel feed (mr gasket)fits holley 3310 / 4160 $10

Moroso air breather Gold anodized 1980s, a few light scrapes (ship minus filter) $100

Plus shipping, Paypal accepted.

Hex head.jpg


IMG_20151012_181234.jpg


IMG_20181106_160415.jpg


IMG_20181106_160432.jpg


IMG_20181106_160500.jpg


IMG_20181106_161810.jpg


IMG_20181106_161821.jpg


IMG_20181106_161916.jpg
 
Where are the scratches on the air cleaner top? Front, side or back of top. I cant make them out in the large picture of the top.
 
Where are the scratches on the air cleaner top? Front, side or back of top. I cant make them out in the large picture of the top.

Hi
The 5th picture down shows a small scrape that is on the very back of the lid

The 4th picture shows where the fan nicked, this is not noticeable when installed- base
 
Hi
The 5th picture down shows a small scrape that is on the very back of the lid

The 4th picture shows where the fan nicked, this is not noticeable when installed- base

Correction: The scrape is just opposite the end of morosO, see pic

IMG_20190129_134021.jpg


IMG_20190129_134039.jpg
 
Last edited:
I'd gladly do $40 for the air filter ship to Colorado. I know my offers relatively low ball compared to your asking price and my only reasoning can be that these are not mopar specific, but 4-barrel for any brand. This isn't meant as an insult.
 
I'd gladly do $40 for the air filter ship to Colorado. I know my offers relatively low ball compared to your asking price and my only reasoning can be that these are not mopar specific, but 4-barrel for any brand. This isn't meant as an insult.

Sorry cant go $40 shipping alone is close to $20 and you are correct not Mopar specific and will fit all the 5" carbs which makes it more desirable. I bought this new in the early 80s for my 396SS and has been stored for a long time

Art
 

Status
Not open for further replies.
-
Back
Top Bottom