[SOLD] mopar a body disc brake parts...

[duster731]

I have an extra set of a body disc brake spindles and brake caliper brackets that came off of a 74 dart.. I cleaned the dirt and grim off of the parts but still need either sand blast or wire wheel to them before paint

I did notice on one spindle where the rotor bearing would ride on theres some gouging in the metal. Not sure if it would effect anything ..

Bolts are NOT included

120$ for the a body spindles and brake caliper brackets ... + shipping ..

 

[duster731]

100$ shipped

 

[71Scamper]

100$ shipped

The picture to right is a bad spindle. As you can see there is a line going almost perpendicular to the spindle shaft. That line is where someone had to cut off a seized on bearing. I can also see that the bearing surface is a mess.

IMO to save yourself from having a pissed off buyer I would not sell that spindle. Metal Heap is a better place for it. Sorry

 

[duster731]

The picture to right is a bad spindle. As you can see there is a line going almost perpendicular to the spindle shaft. That line is where someone had to cut off a seized on bearing. I can also see that the bearing surface is a mess.

IMO to save yourself from having a pissed off buyer I would not sell that spindle. Metal Heap is a better place for it. Sorry

Ok thanks for the clarification...

Wasn't sure if it was still usable or not, but anyway to anyone interested one spindle and two brake caliper brackets 70$ shipped ..

 

[duster731]

Bump.. 60$ shipped for the spindles and caliper brackets

 

[gregpurcell]

pm sent

 

[gregpurcell]

Got them today! Thanks Duster! That spindle is not messed up where the bearing race rides. It will work just fine. Thanks again!

 

[duster731]

Awesome glad we both got what we needed.. mine should arrive on friday ..

Thanks