[SOLD] power steering

[mopardemon340]

looking for a power steering pump and gear box for a 72 demon.

 

[tnts72]

Have one out of a 72 duster, would rebuild the box before installing it personally. I removed it because it had some slop, and wanted manual steering

 

[69 340 dart]

I have that!!

 

[mopardemon340]

how hard are they to rebuild. I have manual and want power. what else would I need to make it work in a manual steering car.

 

[LocuMob]

Steering column is different between the two.

 

[j061093409]

pump brackets vary between engine size - what engine do you have?? I think you have a 340 by your avatar so you need V-8 mounting brackets for the pump

I have 71 Dart with 225 slant 6 column, box and pump still attaches.
would take your manual box as partial trade
IN CT 06109
dart340@att.net

 

[mopardemon340]

my manual box has got a lot of slap

 

[Jimcbmx45]

I have one from a 72 dart I'm willing to sell

 

[72Valiant4Door]

I have a complete setup available from a 73 318 car. Column box and pump. I would restore them if i was u.

 

[mopardemon340]

how do I rebuild them. I had had a few offers and they all have been saying to rebuild them.. how would I go about doing that. also if you could PM me your prices..

 

[tnts72]

how do I rebuild them. I had had a few offers and they all have been saying to rebuild them.. how would I go about doing that. also if you could PM me your prices..

Send the box to Steer and gear or a similar operation for full disassembly and rebuild. You can tighten the mesh to a degree, but once they are worn out best long term solution is to have them rebuilt.

I was going to keep the power box in this 72 until I did the pump it down mod to lower the pressure and then I could really feel the slop at the lower pressure.

 

[newmexguy]

This is a power box from a 74 Dodge Dart. with pitman arm. Clean good condition. Also have V-8 center link, and idler arm for the 73 - 76 style front end.

 

[j061093409]

if you are keeping the car original, you need to stay between 1968-72 equipment or you need to change the suspension that mounts to it - pitman arm, idler arm and center link

 

[newmexguy]

That is good information. All the parts in the above picture came from the same car - a 74 Dart Swinger coupe with a 318 engine.