Push rods?

[72ScampTramp]

Few questions as Im looking to purchase my cam and lifters this week. Im going with solid flat tappet. My question is do these require special push rods? Also what brand and line(what they call there submodel exp.. Comp cams magnum push rods) of push rods are yall using in your 440’s? approx .540 lift. Also with solid cams im assuming you have to run adjustable rockers correct?

 

[Dcuda69]

Yes you will need adj. rockers. You will need to mock the valvetrain together to measure for correct length push rods. Then call Smith Bros. and have them make what you need.

 

[72ScampTramp]

Are roller rockers adjustable and will work in this situation?