oldcancer
Member
i have a guy who's offered to sell me a 60 over 340 with 13 and a half to 1 pistons.......
good idea?
bad idea?
and why?
good idea?
bad idea?
and why?
quick question.....
- Thread starter oldcancer
- Start date
-
wow .060 is pushing it and if it needs more than a hone and rings is a no go at all.
Some blocks are ok, but run warm .060 and the walls are getting boarder line too thin. It would need to be sonic tested, and is it running need a rebuild etc?
13 is to high for the street, well depends on how big the ca is etc, but this is a race motor?
Want kinda $$$$ for it buddy?
Some blocks are ok, but run warm .060 and the walls are getting boarder line too thin. It would need to be sonic tested, and is it running need a rebuild etc?
13 is to high for the street, well depends on how big the ca is etc, but this is a race motor?
Want kinda $$$$ for it buddy?
caferacerx
BAND MEMBER
race only motor at 13.5:1 my guess is they are selling it because it they have a lot of passes on it and know at .060 over it cant be rebuilt
oldcancer
Member
good to know that it's basically a non streetable engine, and being that it would need a rebuild, you guys just saved me 1200 bucks, LOL
if i bought i probably would have found that out the hard way
if i bought i probably would have found that out the hard way
yall are frikkin nuts. that 340 will go 100 over with room to spare. get the thing.
-
