[FOR SALE] Rocker shafts

[Newbomb Turk]

New T/A rocker shafts.

P3577086

$250.00 USD plus shipping

 

[hemichuck]

are those T/A rockers also?

 

[Newbomb Turk]

are those T/A rockers also?

The rockers are W2 but you can’t grasp use them on T/A heads IF you do a little clearance work

 

[Illahe]

New T/A rocker shafts.

P3577086

$250.00 USD plus shippingView attachment 1716368533View attachment 1716368534

Your rocker arms...can you make a recommendation, most of the aftermarket I have tried have issues with pushrod clearance above .550 or tip alignment when used with aluminum heads.

 

[Newbomb Turk]

Your rocker arms...can you make a recommendation, most of the aftermarket I have tried have issues with pushrod clearance above .550 or tip alignment when used with aluminum heads.

B3racingengines.com

You need to correct the geometry.

 

[Illahe]

B3racingengines.com

You need to correct the geometry.

I agree, and I have spoken to Mike at B3. Just hoping some brands are better constructed than others. I bough some comp stainless copies and they are well out of geometry with .590 lift. Useless in my opinion. Just hoping you could recommend a product that's "in close proximity."

 

[hemi572ci]

PM sent

 

[Newbomb Turk]

I agree, and I have spoken to Mike at B3. Just hoping some brands are better constructed than others. I bough some comp stainless copies and they are well out of geometry with .590 lift. Useless in my opinion. Just hoping you could recommend a product that's "in close proximity."

I wish I had an answer for bolt on rockers but I don’t.

The closest I’ve found is using the Harlan Sharp/Mancini rockers on a TF head, but TF put the shafts in the correct location for that rocker. They pretty much bolt right on.

 

[Newbomb Turk]

PM sent

Replied