Slant Six in my 36' Dodge Truck // Floor pan progress

[Saltcityslant]

Here is my progress so far on my floor pan in my 36 Dodge truck Slant Six 225 a-833od swap, if anyone is interested. Used 16g steel and a bead roller to get the shape right. It's a bit whack so far, and I'm not much of a fabricator, let me know what you guys think I should do for pedals and steering column! Made entirely out of scrap sheet

Where I am at now and What I started with

 

[65 Dartman]

Looks good. I need to replace most of the floor in my 47 Dodge

 

[Kendog 170]

Great job for not being a fabricator. Thats one hell of a front bellhousing you got there.

 

[A56]

Here is my progress so far on my floor pan in my 36 Dodge truck Slant Six 225 a-833od swap, if anyone is interested. Used 16g steel and a bead roller to get the shape right. It's a bit whack so far, and I'm not much of a fabricator, let me know what you guys think I should do for pedals and steering column! Made entirely out of scrap sheet

Where I am at now and What I started with

View attachment 1716462081





View attachment 1716462080

True Hot Rodding.

 

[Saltcityslant]

Looks good. I need to replace most of the floor in my 47 Dodge

It's been tough, but pretty manageable. We made it happen with a bead roller, a couple dolleys, a flat face body hammer and a ball peen, plus a lead bag, an Eastwood mig welder, and an angle grinder. Working pretty well so far.

 

[Saltcityslant]

Great job for not being a fabricator. Thats one hell of a front bellhousing you got there.

Winging, winging, winging it.

 

[Saltcityslant]

True Hot Rodding.

Hell yeah, it's either going to work or it's not!