moparfanatic56
Well-Known Member
Have the following sm blk valve train components
Comp cams valve seals pn 505-16 never installed $20
Comp cams 4 groove 10 deg locks pn 626-16 never installed $35
Comp cams steel retainers 1.437" pn 740-16 never installed $45
Also have a complete set of single spring w/damper valve springs. These were installed on the 340 J heads that I purchased and to my knowledge never ran. I do not know what brand they are or what the spring pressure is. I did measure the OD and it is 1.49+ and the spring diameter was .19/.20 (my calipers only goes to hundredths). Asking $100.
All prices are plus shipping OBO from 61469 Illinois.
Comp cams valve seals pn 505-16 never installed $20
Comp cams 4 groove 10 deg locks pn 626-16 never installed $35
Comp cams steel retainers 1.437" pn 740-16 never installed $45
Also have a complete set of single spring w/damper valve springs. These were installed on the 340 J heads that I purchased and to my knowledge never ran. I do not know what brand they are or what the spring pressure is. I did measure the OD and it is 1.49+ and the spring diameter was .19/.20 (my calipers only goes to hundredths). Asking $100.
All prices are plus shipping OBO from 61469 Illinois.
