tubbedamx
Location Boise, Idaho
Small Block Top End Package
Ported Iron Cylinder Heads
Crane Adjustable Rockers w/Banana Grooved Shafts
Smith Brothers Pushrods
Edelbrock Victor 340 Intake
Fits under a flat hood, ‘67 barracuda
Ran this combination on my 408. Made great power and was lot of fun to drive. Selling because I bought a package from Brian Hafliger, IMM engines.
PayPal or Money Order
Shipped from 83709.
FedEx with insurance
Will separate after the heads sell
Package Deal: $2,000.00
For Sale Locally
Heads: $1,300.
Rockers: $250
Pushrods: $175
Intake: $400
Heads: Fresh from the machine shop last spring with 50 miles of city driving. Flow numbers in the pictures. Purchased and ported from a member of this forum.
Casting# 4027596, 66cc chambers, 1.94 intake valve, 1.60 exhaust, 380 open/ 140 on the seat.
Crane Iron adjustable 1.5 Rockers with Banana Grooved Shafts. Purchased from a known member here. Worked great. Used on a 550 lift cam.
17 Smith Brothers 5/16 pushrods with oil hole. I like to oil with both the pushrods and rocker shafts. Length in pictures
Edelbrock Victor 340 Intake. Powder coated black. No stripped holes. Purchased from Summit Racing a couple years ago. As cast out of the box. Not ported.
Can take more pictures as needed.
Thanks Jim
Ported Iron Cylinder Heads
Crane Adjustable Rockers w/Banana Grooved Shafts
Smith Brothers Pushrods
Edelbrock Victor 340 Intake
Fits under a flat hood, ‘67 barracuda
Ran this combination on my 408. Made great power and was lot of fun to drive. Selling because I bought a package from Brian Hafliger, IMM engines.
PayPal or Money Order
Shipped from 83709.
FedEx with insurance
Will separate after the heads sell
Package Deal: $2,000.00
For Sale Locally
Heads: $1,300.
Rockers: $250
Pushrods: $175
Intake: $400
Heads: Fresh from the machine shop last spring with 50 miles of city driving. Flow numbers in the pictures. Purchased and ported from a member of this forum.
Casting# 4027596, 66cc chambers, 1.94 intake valve, 1.60 exhaust, 380 open/ 140 on the seat.
Crane Iron adjustable 1.5 Rockers with Banana Grooved Shafts. Purchased from a known member here. Worked great. Used on a 550 lift cam.
17 Smith Brothers 5/16 pushrods with oil hole. I like to oil with both the pushrods and rocker shafts. Length in pictures
Edelbrock Victor 340 Intake. Powder coated black. No stripped holes. Purchased from Summit Racing a couple years ago. As cast out of the box. Not ported.
Can take more pictures as needed.
Thanks Jim
Last edited:
