yooper822
Joe Roberts
What grease are you guys using to repack the torsion bars, I know the factory used long fiber grease. Is there a modern, cheaper, easier to find substitute?
Joe
Joe
Torsion bar packing grease
- Thread starter yooper822
- Start date
-
damnimcooltom
Too Cool For School
I work for a lumber company, and was lucky enough to find a tub of the OLD stuff in one of the mechanics' shops so I'm set for a while. Last time I was talking to EBooger about it, he said that Chrysler was releasing a grease that would work well. I don't remember what he called it. You might check with your dealer. If they give a crap, they should be able to find out for you.
I use Permatex Anti-Seize Compound. It's temp rated to like 1200 or 1500 degrees. I can't remember which. Too lazy to walk out in the shop and see. But that stuff hangs out forever on parts. It works good. I figure if it's good enough to lube brake calipers up and still be there when you replace pads next time, it's good stuff.
yooper822
Joe Roberts
Aye, thanks for the response guys.
-
