Transmission cooler lines /6 to small block

[Ronjon]

Are the 904 transmission cooler lines for a 72 Dart slant six the same for a small block? Planning to do a swap and wondering if I need to replace the trans lines. They seem to be different part numbers at Mancini Racing. Thx.

 

[Murray]

The bends are different.

 

[Syleng1]

Ends are the same and line up the same. Middle bends are different to get around the engine mounts.

 

[Ronjon]

Thx all for the responses.

 

[str12-340]

you might give 'em a try - a little careful tweaking might save you some bucks and if your going to scrap the old ones anyway...

 

[MidnightSwinger]

I know this doesn’t help now but I am about to attempt something similar. I have the slant six/904 lines from my 74 swinger and I am going to try to to make them work on a 383/727. I’ll post my findings here.

 

[Ronjon]

I know this doesn’t help now but I am about to attempt something similar. I have the slant six/904 lines from my 74 swinger and I am going to try to to make them work on a 383/727. I’ll post my findings here.

Thx it will be a few weeks before I’m ready, interested in knowing how you make out.

 

[Ronjon]

you might give 'em a try - a little careful tweaking might save you some bucks and if your going to scrap the old ones anyway...

Thx, good idea.