SRT_DSTRHOLC
Well-Known Member
I bought a drive shaft that I believe has no U joints on it, I cant tell because its back home. If it doesnt have any, What U-joints would I need for it too work on my 904 and 8 3/4 rear.
U joint
- Thread starter SRT_DSTRHOLC
- Start date
-
Measure the width from where the snap rings go. More than likely it is 7260 or small joint. The Presision part number is 315. Most parts store will have it.
Supershafts
Well-Known Member
Measure the hole on the shaft and inner width between the end yoke on the rear
-
