Two Time Signet
New Member
Upgrading my 1966 Valiant 9" drums to BBP front discs and want to upgrade the rear brakes on my 7 1/4 rear axle.
I already have the DrDiff BBP 7 1/4 axles and front discs, want to buy the 10" x 1.75" backing plates. Need the four hole flange bolt pattern on these backing plates, not the five found on larger axles like 8 3/4. Already have a set of those in 10" x 2.5" that I could modify but would prefer the correct 2.25" offset.
Have new BBP 10" drums, brake shoes, cylinders, and hardware but missing the back plates. This will stay a weekend cruiser so not wanting to replace the rear axle or go to rear disc brakes at this time.
My location is central Washington state.
I already have the DrDiff BBP 7 1/4 axles and front discs, want to buy the 10" x 1.75" backing plates. Need the four hole flange bolt pattern on these backing plates, not the five found on larger axles like 8 3/4. Already have a set of those in 10" x 2.5" that I could modify but would prefer the correct 2.25" offset.
Have new BBP 10" drums, brake shoes, cylinders, and hardware but missing the back plates. This will stay a weekend cruiser so not wanting to replace the rear axle or go to rear disc brakes at this time.
My location is central Washington state.
Last edited:
