purplescamper
Well-Known Member
the sending unit in my fuel tank has a 3/8 line comming out of it, i want to hook it up to a 5/16 fuel line. what do i need to adapt the two lines ?
what do i use to adapt these lines?
- Thread starter purplescamper
- Start date
-
lilnoah
Supercharged slant six with 4 speed and 8.25
3/8 to 5/16 union
NukeBass
Well-Known Member
Are you using black hose to connect the two? I used this http://www.jegs.com/i/JEGS+Performance+Products/555/15946/10002/-1
when I replaced a high pressure pump with a stock style lower pressure fuel pump that had a 5/16 inlet (I have a 3/8 line to the pump).
when I replaced a high pressure pump with a stock style lower pressure fuel pump that had a 5/16 inlet (I have a 3/8 line to the pump).
g413
Well-Known Member
Just a couple of days ago I came across an interesting adaptor. It is not a fitting, it is just a premolded short piece of hose, 5/16 to 3/8. It was on eBay and reasonably priced. I never knew they made such a thing.
-
