Whats this ps pump from??

[4spdragtop]

Cleaning out the garage and sifting thru stuff I dont need, my car is std steering so I dont need this ps pump and will list it, but not sure what it is?? Pulley is 6 1/4" diameter.

Thanks
4spdragtop

 

[RustyRatRod]

Mopar federal pump with small block bracket.

 

[66plyValiant]

Mopar federal pump with small block bracket.

X2 its a mopar pump setup to work with small blocks, one of the earlier pumps used before the saginaw pump were familure with

 

[oldkimmer]

.........68 -69.............sb pump.....oh ya its a saginaw pump.....kim..........

 

[1wild&crazyguy]

good pump, rebuild and use it... kits are about $29 from car quest.

 

[4spdragtop]

thanks everyone!!

 

[hemi71x]

The pump that you have with an "Oval" filler neck is a Saginaw pump, if your going to be rebuilding it, and order parts for it.
Here is a photo of what a Federal, and TRW pump looks like for your reference.

 

[4spdragtop]

hmmmm, gonna have to take the bracket off and see what it looks like

 

[hemi71x]

hmmmm, gonna have to take the bracket off and see what it looks like

You don't have to take any of the brackets off to identify a Saginaw pump.
It's easily identified by the Oval filler neck of the body housing.
That's how you tell between a Saginaw pump, and the TRW's & Federal's.

If you want to identify a TRW, or Federal pump, then you have to remove the bracket, to tell the difference between the two.

 

[RustyRatRod]

Well I'll be dog. Thanks dude. Sorry bout the wrong info.

 

[4spdragtop]

You don't have to take any of the brackets off to identify a Saginaw pump.
It's easily identified by the Oval filler neck of the body housing.
That's how you tell between a Saginaw pump, and the TRW's & Federal's.

If you want to identify a TRW, or Federal pump, then you have to remove the bracket, to tell the difference between the two.

Thanks Hemi71x!!

Hey stroker, no worries, I was looking more whether it was sb bb or /6 the extra info is a bonus!

Thanks everyone!

 

[PocketAces]

So does anyone know what pumps were used in what years. I have a 1965 Dart and I'm trying to keep it as original as possible.

 

[yellowdartdave]

Saginaw on left Federal on right

Slant 6 Pulley

V8 Pulley