wheel cylinders

[trudysduster]

I bought an 8 3/4 10 years ago from someone and sent it to Moser Engineering and had it cut down to fit under my Duster and I don't know what it came out of. I am restoring the car and noticed one of the wheel studs backed out and got into the wheel cylinder. Now I have to replace it and do not know what it is from. Does all the 8 3/4 from the 60's like the c body, b body, e body have the same wheel cylinders that have the 8 3/4 rear end or are they different depending what car it came out of. The local parts store has a bunch of young kids working there and are clueless.Is there a website I can go to and pull up any pics to reference this.your input is appreciated,thanks,Bill

 

[4spdragtop]

Im not sure if they are the same or not but I would post the dimensions of what you have....mount hole spacing, circumference, length of it without the boot etc.

 

[trudysduster]

well,I have to get into that today. I was just hoping someone could tell me without having to pull this apart. It looks like I am going to have to do this. I have another Duster here I put a rearend in out of a 66 Coronet. Its an 8 3/4. I am going to pull it down and look at it also to see if they are the same. I wouldn't think Chrysler would make the cylinders different for the type of car as long as it is an 8 3/4 it seems like they would be the same.I am not sure though.