Will they fit?

[azdurango]

Hey guy's, I have a 64 Valiant wagon that is upgraded to BBP and standard a-body 8 3/4 rear axle. I want to put some AR torq thrust originals on it.
They are 17x8 with a -0mm offset and a 4.5" backspace. Will these fit the vehicle ok?

 

[hellion_locdogg]

Put a straght edge vertically from the hub/drum then using a tape measure to inner and outer fender. On my '63 Dart 7" width is pushing it in the rear by the spring, I may have 3/8"-1/2". I'm in Phx,AZ also.

https://www.rsracing.com/tech-wheel.html#fitting


,Cliff

 

[azdurango]

You think I will be ok with a spring relocation kit? Will the front's be an issue?

 

[Commando66]

What brakes did you use in the front? I would think that an 8" wheel in the front is a little wide. Tire size may dictate what wheels you need also.

 

[azdurango]

What brakes did you use in the front? I would think that an 8" wheel in the front is a little wide. Tire size may dictate what wheels you need also.

I'm just using the late model factory disc brakes in the front. Also the car will be lowered slightly with low pro tires.

 

[Commando66]

The later model discs move the wheels out toward the fender.