68 Rat Rod
Well-Known Member
I want to replace the old windshield wiper motor assembly in my 68 Dart with something that takes up a little less room around the distributor. I installed a MSD e-curve distributor and the plug wire terminals are only about 1/2" away from the wiper motor assembly. When I install the plug wire on the cap, one of the ends will get really close. Would a wiper motor assembly that has the motor off to the side instead of sticking out forward give me a lillte more room? What year and model car whould have had such a wiper motor. I've seen these wiper motor assemblys on other A bodys. I'm not sure what to look for. Any help would be greatly appreciated. Thanks. Gary
