Search results for query: *

https://www.forabodiesonly.com/mopar/attachments/20160409_141623_resized-jpg.1714937786/ So i have decided to go with an 18" Black wheel like the one pictured, 8" front and 9" rear if possible. I have upgraded the front brakes to disc and the rear will stay drum on my stock 8.75. Both will have...

I am swapping out the old SBP axles in my 8.75 but sticking with drum rear brakes. I found a somewhat local guy that has a pair of 10" BBP backing plates for me. I want to buy all new parts for a complete set of drum brakes. What year car would i search for to find 10" brake parts? I will be...

I want to convert my 8.75 rear end to BBP axles and would like to find complete 10" drum brakes as well. The backing plates are hard to find and i have know idea where to find a complete assembly. Dr. Diff does not have any stock. Anyone have any for sale? I was debating on a complete rear end...

I have an 8 3/4 with the SBP axle right now. I plan on swapping the axle out for ones from Dr. Diff with BBP to match the BBP fronts. I am keeping the drum brakes in the rear but plan on purchasing the 10x2.5 kit from Dr. Diff. After doing some research here, i have found that the backing plates...

So it seems everytime the engine has been running at normal temp for 15 mins or so, if i shut it off, it is a pain to restart. Let say i drive through town and have to get gas, i shut off the engine while pumping fuel, i have to almost floor it to get it to restart. It rolls over normal but just...

VNTW51577658865 Torq Thrust II 17x7 & 18x8 5x4.5 Package I want to put new wheels and tires on my 71 Demon, it now has front disc brakes with bbp and i am going to replace the old axles with bbp and drum setup 8.75 rear end. My question is.. What backspacing and wheel offset do i need. I've...

MBM Standard Manual Master Cylinder Kit I converted the front brakes from drum to disc brakes two years ago and my MBM kit came with this master cylinder. Now I ready covert the rear over to disc brakes as well along with swapping out axles for the large bolt pattern. My question is, will the...

As of right now the 8 3/4 rear end is a one wheel peel. The 71 Demon it is on had been stting for like 20yrs. I just got it back on the road last year after installing a front disc brake conversion along with new suspension upgrades. It now has 5x4.5 bolt pattern on the front but 5x4 in the...

So I was going to just replace the hoses on the 340 because it has been sitting for years. I drained the coolant and removed the hoses to find this. So I ordered a new pump and gasket tonight. question is, how does the fan come off? Are there bolts on the front of it? Tomorrow night I’ll start...

Before I get my car alignment done, I need to replace some bushings. I tried to have the alignment done but they said the bushings were too worn. I plan on putting a set of QA1 upper arms on, sway bar bushings and end links too. my question is, how do I replace these bushings on the torsion...

I installed a MBM disc brake kit on my Demon. The kit came with the spindles and have the insert for the small upper ball joint. My question is.. I need to replace my upper control arms because the bushings are too bad, i'm thinking about going with a set of QA-1's with the bigger ball joint...

So i finally got the disc brake conversion installed 100%. All new calipers, rotors, rubber hoses, lines, Master cylinder and adjustable propotioning valve. Everyting is bled, along with bench bleeding the MC. Problem i am having is the drivers side caliper is sticking a little bit. I can...

So i bought the MbM disc brake kit for my 71 Demon from Pirate Jack. Got the kit and started assembly a few weeks ago. They forgot to send the rubber brake hoses with the kit. When i finally got the lines and put them on, i found out that one of the caliper holes was stripped where the banjo...

Once i have the Master cylinder bench bled.. do i put the pushrod back on since the the rubber hose and bracket get mounted on the master cylinder too. Than attach the brake lines. Hoping this doesn't take too long and get air back in the master cylinder. I have the stock push rod and also...

So I bought the MBM front manual front disc kit from Pirate Jack with a new master cylinder. I’m wondering if I need to use the adjustable push rod kit that came with the kit or can I use my old push rod, I did order the correct bushing/seal for the end of it that goes into the cylinder. Also...

Anyone try this valve out with good results. Universal Adjustable Knob Proportioning Valve For Wilwood Style For 260-13190 | eBay

Installing the front disc brake kit on my 1971 Demon, the brake line that hook to the rubber hose from the caliper are junk. If I were to bend my own, does anyone have the measurements for the length lines I need. I’ll need lines from the rubber hose to the proportioning valve and back up to the...

I'm starting the install on my front disc brake conversion tonight. Is it a good idea to use anti-seize on any of the bolts? I'm no mechanic by any means but having fun working on my Demon. Thanks for any help.

Hello all, I'm looing at converting my 1971 Demon to disc brakes in the front. I'm looking at the kit from Mancini Racing plus the Master cylinder. How do they compare to others. Their shop is a couple hours away from me so I would like to support a local company. Anyone have pros or cons on...