So I decided to bite the bullet and I found and ordered a EPAS setup with a controller unit. I didn't opt for a expensive controller I got the next step down. But for a $100 bucks more I could have gotten a controller that regulated the amount of pressure via the axle or drive shaft speed (slower the shaft spin the more pressure giving / faster the spin less pressure given from the box)
I was able to find a unit that had the whole steering linkage for an aft of the EPAS box
Anybody know if grant makes a kit that will fit the Saturn Vue wheel splines?![:steering: :steering: :steering:](/mopar/styles/default/xenforo/smilies/steering.gif)
I've read the two threads about this that fabo members have pointed out to me (thank you gentlemen) and the ford thread
I think I can do this....?![Roll Eyes :rolleyes: :rolleyes:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
$35 Electric Power Steering with Fail-Safe - No eBay module and no caster issues!!!
Electric power steering Not sure I'm going to do it that same way as Barry, but well see..
$100 Power Steering? Yes you can. Use Column Electric Power Assist System (EPAS) ! - Ford Muscle Forums : Ford Muscle Cars Tech Forum
So this will be the next project after I finalize the rearend
I should have these in about a week.
I was able to find a unit that had the whole steering linkage for an aft of the EPAS box
Anybody know if grant makes a kit that will fit the Saturn Vue wheel splines?
![:steering: :steering: :steering:](/mopar/styles/default/xenforo/smilies/steering.gif)
I've read the two threads about this that fabo members have pointed out to me (thank you gentlemen) and the ford thread
I think I can do this....?
$35 Electric Power Steering with Fail-Safe - No eBay module and no caster issues!!!
Electric power steering Not sure I'm going to do it that same way as Barry, but well see..
$100 Power Steering? Yes you can. Use Column Electric Power Assist System (EPAS) ! - Ford Muscle Forums : Ford Muscle Cars Tech Forum
So this will be the next project after I finalize the rearend
I should have these in about a week.