Recent content by BHA43

I picked up a set of ported J 2.02 heads set up to run with a roller cam, also got the Erson cam that was used with them part # E420999. No lifters or push rods. I plan on using them on a stock stroke 30 over 360 with KB 107 pistons that I have. Grind says 298/422 and 306/422. I can't find...

I have just been figuring Fed Ex shipping at $75

I winter in San Antonio, I could bring one with me, already taking one to San Marcos

Mine are made in fiberglass from a mold made with an original NOS DC piece. They are just a hair thicker than originals. They are test fit to an original "Hang 10" deck before shipping. There are some fiberglass parts out there that may be cheaper but I take pride in my product. You can check...

Yes they are fiberglass. Fed Ex usually is covered by $75. The newer one with the rib is the only one for now. If I find an older deck I could modify!

They do have the ridge. For mounting hardware you would use any style 1/4 bolt you prefer, myself I would use a stainless Torque drive, but others may want something else. I Forgot to say to PM me if interested. I don't come here much but I get email notice n PM's.

Duster/Demon rear spoilers $250 plus shipping. From Iowa. The middle one is the NOS original I took the mold off. They are made in fiberglass

I have a guy looking for a pair of 10" SBP frt. drums or just hubs for a 65-72 A. His studs were loose & we welded them in solid but he wants a virgin pair. I figure if there should be some out there left over from a disc swap! Shipped to zip 50126. thanks

The counter & stools came from a local diner built in the 40's. You can see them in the original red in one of the lower pics. I got the STP patches off E bay & had a local upholstery lady stitch them up. It is fun when people come over to watch them look over everything, especially little kids...

You might see a theme here! The outside I call it "Possum Lodge"

Any pics of the stuff that goes along yet?

Would you sell the 4 bolt main kit?

check shipping to 50126 Iowa

So it is a 3 piece jig or 3 pieces that you can use individually depending what end needs attention? I guess what I mean does the full chassis sit on the main one or do the small ones attach to the main & the the chassis goes on the assembly. Any pics of the related parts yet? Does the car have...

Yes the missing headlight one was a convert. & I think the coupe was a 24?