Search results for query: *

Hello All, Doing a Slant Six to 273 swap. I have a Sanden A/C compressor currently on my Slant Six. Does anyone know where I can find a Sanden A/C compressor bracket that will fit a 273? Thanks in advance.

Yes, that hole feeds the adjuster.

A set (4) Hankook Kinergy WW Tires 205/75R14 with no patches or curb rash, < 4000 miles on them. Manufacture date 5021 on all four tires. $200.00.

Hello all, Doing a slant six to 273 conversion. The 273 I picked up has points. Would like to convert it to electronic ignition. Would like to use a factory Mopar setup from perhaps a newer 318? Does anyone know if a 318 electronic ignition and distributor will work on a 273? If not, what are...

truck has been sold, thanks to all who viewed and commented on this great truck! LD71

Cranked up the pressure washer after using a wire brush. It wants a home. Starting to head in the right direction.

Trails

Megaparts had them as well. Maybe DMT too.

Hello All, I bought a 66 273 that has a 2 barrel BBD carb on it. I would like to upgrade to possibly a carter 4 barrel carb. What's the best manifold and Carb to run on these engines? Thanks in advance

Do Magnum heads fit a 400 block?:poke:

Alright, I finally got into my (just rebuilt) 46rh transmission that's currently in my '91 Dakota and of course it ate itself alive. All my clutches are in the pan. My converter lockup was stuck so I thought I was gonna be swapping the solenoids and low and behold... well.. you get the idea...

Try Mancinni Racing, they are a Mopar place. Dave

I mistyped that. The backspacing is actually 4.25 and is just about right with the 70s disc brakes in the front and cut-down c-body axles in the rear.

I understand that. I was on a different forum years ago and they talked heavily about using water at temperature for boring and honing blocks and they found no real difference in horsepower or ring sealing or longevity, but I don't know this as fact nor do I have any experience with it. But it...

I've installed a lot of glass but never one that started from the inside. ?? interesting.

...never heard of osmosis water till now. I've always used regular water and never had any issues with my cooling system's. I mix my antifreeze for -40*- -50* below zero. I always tell people that you have to figure in the wond chill factor and driving into the cold. I use only Prestone...

I would use it. I would not think twice.

On a warm May evening at a strip near Valdosta, Georgia, I ran my street driven 67 Barracuda for the first time in probably twenty years. It almost made it into the 12's. My grandson was there with his 550 hp Vega bracket racer. He races a lot, and was track champion in his class at his home...

Seats are narrower not sure if they’ll mount on your seats?? If so that might be the answer

Just read a note they work but you’d have to drill hole’s because 66 has the full console

How round the cylinder is makes a hell of a lot more an issue with ring seal than a thou or two in the ring gap does at least in our shop!

Nice. Luckily I had no issues with my factory steering column. I'm glad I spent the dough on Doug's Headers, others like Hooker are way closer to the ground.

Do not know send pics. Found a post from 2006 and I grabbed those pics that said 1965. I'll see if they match. In the meantime I'll try and look up interchange year's

That's good information. Thanks!

Driver and passenger

I have a great set from 66 is that the same?

Got rear glass in. The fellow helping has done this before, but this goes in from the inside. And it was a real fight. Front glass- i fit rubber to glass, and it seems the gasket is a little big. Dunno if i can get Kimmie to help. Glass, then i can put wipers on and test them.

There are teo holes in the lifter. One obviously dribbles oil down the rocker arm. Question: Does the other hole seep oil out the screw of the rocker ball?

Check the 11/10/9 second zone listings in the racers forum up top in the sticky section. The thread is supposed to be laid out in a fashion so it’s easy to read the list of parts that the poster used to obtain the ET and speed. With this, anyone happening to stroll in looking to obtain an ET...