Search results for query: *

Hey guys, I've got a friend who is working on a 69 Barracuda coupe and he needs the side pieces of molding for his rear window. Does anyone have these they'd like to sell or does anyone know where they might be available? Thanks!

Does anyone have or know where I can get an inspection cover for a 727 with a 360? Thanks

I am switching projects yet again, one day I'll get one done and then hopefully keep it for a while. Anyway, I will be selling an engine that I've had all of the machine work done on and have gathered almost all of the parts for. My dilemma is whether I should now part it out, sell it complete...

I have a bent rim and need to replace it. It's a 14" x 6" 5 on 4.5 Ralley. I don't need the trim. Thanks FABO!

Many on here have seen this car before when Slappy was selling it. I traded him for it last winter but now I have fallen into a rare 1970 383 4spd Barracuda that I was unable to say no to. So this car is back on the market. Slappy said it best so a lot of this post is copied from his. Here is...

Hi Guys, I think I'm finally ready to begin assembling my 340. The block is done, the heads are done, rods have been reconditioned, crank has been turned, new cam, new pistons, everything has been balanced including the clutch and I think I have most everything I need. Does anybody know of a...

Does anyone know how the altitude in Denver 5280' plays out in heads? I know that we generally used smaller cfm carbs 650 vs 750 because of the thin air. Does it make since that the smaller valve 308's would work better up here also? I'm thinking the velocity vs the volume would especially work...

I hope I have this in the correct forum. Maybe the mods could move it if not. Thanks! The Duster is here and seems to run okay with the 360 that someone put in it but, what's a toy if you can't play with it? So, I would like to build this 340 block that I have and drive a 340 Duster like the...

I need some advice. My new 70 Duster has a 360 but the car was born with a /6. After looking closely I see that the original /6 K member is still in the car because it has a motor swap mount kit, the one that pushes the motor about 1 1/2" to the drivers side. It only leaves about 1/4" header to...

Saw this on Craigslist an thought I would pass it on. http://fortcollins.craigslist.org/cto/3553480804.html

:blob: I finally got to go pick up the new Duster. Thanks Slappy, it's as nice as the pictures showed! :burnout:

I bought this car (see my Avatar) as a project but after 6 months of just looking at it, I think the reality is that I do not have the time or skill to put it back together. It's a 72 that has been media blasted and urethane primered but no body work has been done yet. Everything from the sail...

I'm scrapping a 70 Duster very soon (possibly tomorrow) I think I've gotten everything of value off of it with the possible exception of the frame rails. I'm not sure if they're worth the effort to remove or not. I'm pretty sure they are decent but removing them completely changes the way this...

I have a 70 Duster with a 7-1/4" rear end that is getting scrapped soon. I also have a 72 Demon with an 8-3/4" rear end that doesn't have the lower shock mounts. Is there any difference in the two? Can I keep the shock mounts from the 7-1/4" and use them with the 8-3/4" rear end? If not does...

Parting out 1970 Duster, see pictures below and let me know if there is anything that you need. I would prefer that the larger pieces go locally but will consider shipping if need be. The doors, hood, trunk deck, and interior are gone. I still have the following: set of 4 Craiger SS 7" 5 on 4...

I listed some AMD Duster quarter skins for sale several days ago for what I thought was a decent price and have had zero response so far. I posted them on the local craislist as well, same result. So here is my question; is it that there is just little call for these and I need to be very...

I have left and right NIB AMD quarter skins that I won't be needing and am looking to sell. Part #'s 710-1370-L & 710-1370-R. AMD sells these for $299 each shipped, I am asking $175 each plus shipping. PM me if interested and we can figure out the best way to get them to you. I'm in Aurora...

Well, I just got back from picking up moparbanks project Demon. One of the items he included in the deal is the center cut section of a 2012 Dodge Challanger hood. His plan had been to recreate the hood on Mr Norm's pro touring Demon see pic below. I like it and would love to continue with that...

It looks like my project has evolved from a Duster to a Demon so that leaves me with these two Dusters to sell. Maybe someone will pick up this project and move it forward. Niether of these two cars have complete drive trains or interiors but the maroon one does have a 225 with no intake or...

Hey guys, I'm still looking for the right car to build and there have been several options. I have two 70 Dusters, one is an console shift automatic H car. It is sad how this car has been abused but there isn't any rust to speak of. Somebody botched quarter skin replacemnets on both sides and...

I may be putting a 1970 Duster roller for sale on Craigslist but I'm not sure what to ask for it. It is a bright blue 340 center console automatic car with no drive train or interior or windshield. The guy before me was setting it up for race and added frame stiffeners, motor plate and a roll...

Hi Guys - For a while now I've been gathering up parts for my Duster build. So far I have a six cylinder donar car and a 340 Duster that needs quite a bit of body work that I had planned to use along with about 80% of the parts I will need (old and new). I'm just about ready to get started...

I have two 1970 Dusters to use for my build. One is a six cylinder car and the other is a 340 car. My car will be a 340 car so it seems that one is the one I should use. But there's a catch, the 340 car is missing the dash AND THE VIN TAG! The title, fender tag, and frame stamp all match. So...

If I had two four speeds one is cast iron A833 and the other is an Aluminum A833OD can I swap the internals to make the cast iron case the overdrive? I am considering buying the OD that is for sale on here but it is aluminum and I've heard not so good things about that. For my application I...

I am planning my 340 Duster build and I really want to get it right. The motor hasn't been built yet, the four speed hasn't been gone through yet, rearend gears haven't been chosen, and I'm not locked in on tire size yet. I am virtually starting with a clean sheet of paper. So here's the...

2004 Hemi Durango chassis and complete drive train Aurora, Co $2,500 as a package $1,700 engine, computer, harnesses and accessories (alt, ps pump, ac comp, etc) $650 545RFE $250 transfer case $100 R&P steering Plus any shipping arrangements cash, cashiers check, partial PayPal (smaller...

I am removing a 225 from a Duster and going with a 340. I'm pretty sure I'll have to change the K member, do I need to change all of the suspension parts also?

8 Cylinder 'K' member, looking for one that can be blasted, powdercoated and rebuilt. Preferably not dented up too bad. Doesn't hurt to ask, A SHARKSTOOTH GRILLE anyone?

Need some advice here guys. I have rust through under the driver's and passenger's feet and I need to add a four speed hump. Do I patch this thing up with floor sections and a hump or is there a re-pop floor that already has the hump? I know that AMD has a floor pan but I would need to add the...

Okay the plan is coming together and I think I've settled on a few decisions for this upcoming build. My 70 Duster will indeed be a 5.7 Hemi swap and I'm pretty settled on using my A833 tranny and EZ EFI fuel delivery. And, I'm wanting to use the RMS coil over front and rear suspension. So...