Search results for query: *

Howdy all....I have surfed around the internet and am not finding any tan/brown split front bench seat cover for my 73 Gold Duster. If anyone has any sources I 'd love to find an OEM type cover for this seat. As you can see the current one is toast....LOL

Does anyone have a manual that shows the torque specs for the valve plates and cover bolts on the RY2 AC compressor? TIA

RV2 was blowing hot, so evacuated the system (R12), added the 134a reto fit couplings and pulled vacuum. 24hr no leaks. Added 24oz 134a and gauge readings are displayed below. No change in temp.

I have this MSD distributor by itself. I'd like to use it on a 360 car that is currently equipped with old school breaker ignition, I want to upgrade to electronic. This motor is stock, but I am building a HP engine for it. I could buy a kit like this ProForm one to do the conversion. Which...

This is a 408 build. I'd like to know if the valve springs on these heads are good to go on this build, plans are for 9.5 or 10.5 CR and a Lunati camshaft with either .560/.565 or .535/.550 gross lift. I have them at the shop now being looked over. The only other set of springs I have are MP...

No, not an Eastwood movie :-O I just cant seem to decide on the best bang for the $$$ cyl heads. Eddie, Indy, EQ or others.....build is going to be a 5.9L Magnum (got most of the other parts selected) and it will be running a turbo eventually so that is a consideration. 500HP minimum. I like the...

Anyone have any words on this camshaft? (360/727/8.75sg 3.55 unknown stall, 3400# car) Advertised Duration (Int/Exh): 268/276 Duration @ .050 (Int/Exh): 226/234 Gross Valve Lift (Int/Exh): .494/.513

I am working on a little project and need some input on fuel level gauges. Which ones work with our Mopars? This project actually involves a 75 Ramcharger. I am replacing the stock gauges with 1 1/2" Bosh stuff and there is no 1 1/2" fuel level gauge available from anyone. So I will either...

Strong gasoline odor while driving with all windows down. No visible gas leaks anywhere. Very poor MPG (130mi for almost a full tank of gas) 5.9L Magnum crate with a Summit double pumper carb. No leaks anywhere.

Looking for a big block 727 cable shift transmission, I am in Texas so close is really good for me!

Maybe you have some stuff you bought and never used? All for a 500 stroker 440 build. 1. Oil Pump (new) 2. Distributor/oil pump drive gear 3. Distributor/ign system 4. TC and bolts (got a gear drive or new double roller set?) 5. Intake manifold front and rear gasket brackets(?) never...

I am in Texas and would drive a reasonable distance for a cable shift A727 BB trans, at the right price. PM me please.

I wanna pull the trigger on a early B Body disc conversion kit made by Wilwood, who is best price and service? Jeggies has this: http://www.jegs.com/i/Wilwood/950/140-11020/10002/-1?CAWELAID=1710645763&CAGPSPN=pla&gclid=CPezsIuWo8sCFYKBaQodrjEB9Q any recommendations for a power booster vendor as...

...........what are you using and why? Who has the best price/parts/service. I'd like some camshaft ideas too if you wanna give them. 3.55 8.75SG, 727, 3600 lb 4dr sedan. This is a street ride. Thanks!

Anyone done this? I found a 440 block for sale and the pick up tube passage has been drilled out at the wrong angle and it makes contact with the reciprocating assembly now. I guess someone was trying to add a 3/8 pick up tube at home. Anyways the rest of the block has like 500mi on it after...

Installing an AAR hood and want some hood pins. What make/manufacturer are you using?

Mopar Performance M1 Aluminum Single Plane Intake Manifold Fits 1992-2001 5.2L & 1993-2003 5.9L Magnum Engines I took this off my Mopar Magnum Crate engine as I went with a dual plane intake, Has 4000 miles on it. Clean it up and save some money. Looking for $225 plus the ride from...

Bought all this to install on my 1972 Dodge Dart, but went another route. Over $300 when you consider shipping expenses. Take $250 shipped. Parts included: Dakota Digital Fan controller PAC 2750# $115.00 Fan relay kit Dorman #902-219 $30.00 Fan resistor (2) #20852 $7.00 ($14 for the...

This is a freshly re-manufactured Holley dated 6/26/14. Was on a 73 Plymouth Duster for about 3 months before the engine was pulled and put in another car and this carb was not used. Ran perfect on the other 225cu engine. On the web I see it sells for $189, I just want 1/2 that $90 + actual...

.............to fit my 5.9L Magnum

Come join me in a cruise to a birthday bash (pastor of my church, his annual party-lots of good people and no it isn't church related) leaving Sat July 4th in Alvin? Free food and entertainment and great company. We meet up at the Bank in Alvin, Hwy 6 and Hwy 35, cruise the backroads to the...

............just to make sure it isn't going to crater on me.....enjoy. http://vid659.photobucket.com/albums/uu317/ubinsniped/72%20Swinger/20150614_174132_zpshq2k1xbe.mp4

.............so to speak. After all the $ and time I have thrown at the 5.9L Magnum in the Dart it refuses to get well. I finally got all the parts installed (new H/S 1.7 roller rockers/non-adj, Rhodes Super Lube roller lifters, a new RMP Air Gap & all the bells and whistles that go with...

Never mind..........I got this :-)

I need to transfer the contacts, pictures and files from a Windows phone (nokia Lumina 925a) to a Samsung Note 4 Android. I have tried to plug in the Nokia to my laptop but the computer does not locate the Windows phone even though I have the Window Phone app on the laptop. Anyone have a hint?

360 Magnum crate engine, changed to a Rhodes roller lifters and HS 1.7 Roller Rockers, think there is any need to swap out the stock pushrods? Engine runs good.

I have traded the Mopar M1 Single Plane for an RPM Air Gap. The accel pedal has too much slack when I adjust the carb at WOT.

Bought the JEGS #53252 Billet aluminum water neck for the RPM Air Gap. It is O ring sealed. So drop the T-stat in and then bolt up the water neck I am going to assume. Do we really need that T-stat? And will the one that came out of the M1 single plane work in there?

I know someone has the answer, my existing cross over hose will not fit off the M1 Magnum to the Air Gap Magnum. Any part # available for something that will work?

#1. I seem to have a couple extra tapped holes in the intake that the M1 did not. First is the extra small sensor (fine threaded) on the top/front. I used one for the water temp sensor (nearest the thermostat housing), but the other must be for IAT or something I am not using with carb system...