Search results for query: *

For sale 1966 Plymouth Valiant Signet driver quality. $3500 OBO. Car is in great shape, adult owed and is solid for it's age. 225 /6 automatic with 46195 original miles on the clock. Manual steering, manual brakes. I have new carpet from Classic Industries that needs to be installed. Floor pans...

After a tune up, cleaning and since it's sunny and 90 here in Jersey,...I took the Signet out for a ride and took some pictures. I need to get the interior done. Need to weld in a few patches for the floor and then get the new carpet in. Seems I never have the time to spend on it, but man it was...

Anyone know where to get parts for this rear? It's a 7 1/4 sure-grip. Also has anyone rebuilt this rear and is there any write ups on it. I believe the clutches need to be replaced. I haven't looked at it yet, but seems that's the issue. I have slipping going on and a what sounds like a...

The other day,.well for the last few times out with the car the engine just dies and or sputters while driving and pops out the exhaust and I mean loud. Even when I start it cold this happens sometimes. Then I'll crank it and crank it and pow out the exhaust. It's like the fuel is still getting...

Anyone know where to get headlights like these. Also, does this trunk mat look right? I purchased it from Classic Industries. Fits ok, but where the jack mounts it looks off or do I need to trim it to fit? See video.

Can someone post a few pictures of your carpet in your 66 Valiant 2 door. Looking for pictures of how the carpet is mounted right inside the door between the seats and sill plates. I might be missing a piece of trim, but not sure. When I purchased the car it didn't have carpet in it. Thank you.

I want to put stripes on my car,.it a 66 Valiant Signet. The color of the car is gold. I want to put black satin colored stripes or flat black stripes using vinyl. My questions is this,.first satin black or flat black? The other is how wide the stripe should be? Since the hood is 56" wide and...

1966 225/6. Since I have an issue with my Carter 1695 1bbl that has constant vacuum at the Advance port that should be ported. Should there be vacuum at this port at idle? Idle is between 600 to 700. Has anyone set the timing without using the advance port on the carb and leaving it...

Hi. I have a 66 Valiant /6 225. (New to me) Engine runs great, but after it's completely warmed up it starts to buck/surge while driving down the highway at around 50 give or take. At idle,.it's a little rough also after it's warmed up. It seems to me it's like the ignition is shutting down...

My fuel gauge Intermittently worked in my 66 Valiant. Now it seemed to stop for good. All my other gauges work. I grounded the sender wire and the fuel gauge doesn't move. With that said, is the instrument cluster hard to take out? If so does anyone know how it's done? I see four screws that...

66 Valiant /6 225. Engine runs great, but after it's completely warmed up it starts to buck/surge while driving down the highway at all speeds and at idle,.it's a little rough. It seems to me it's like the ignition is shutting down intermittently or fuel? Anything anyone can think of to check...

Does anyone have any pictures of the stereo you install in your 66 Valiant or equivalent? Seems I'm having trouble finding a stereo to fit the dash. So looks like I have to fit a modern stereo into the dash. I know I can purchase a dual knob,.but even those you need to cut the dash to fit them...

This is what the PO did to the kick panels in my 66 Valiant. I have the correct material to make new ones. My question is, the factory painted them black, but was it flat black or satin finish? Looks like satin to me, but you never know. If you look close at the picture, it looks like there was...

Rebuilt the 1bbl on my /6 and it still has a bad dead spot taking off from a standing stop. I'm thinking a bad accelerator pump still even though it was replaced when I rebuilt it. I did stretch the pump and oiled it per directions. Any help would be appreciated. Before the rebuild, it had the...

I haven't looked, but are the fresh air vent boxes removable out of a 66 Valiant Signet. Passengers vent door is loose. I'd like to remove the box if possible to remount the door. If so how is it removed? Are they just bolted in? Thank you...

Like to go with a new exhaust system for my 66 /6 Signet. What exhaust are you running on your /6 that sounds good. Parts you ran and cost if you remember. Also, anyone running no muffler? Pictures please if you have them or video of how it sounds/looks.

I'm looking for a B&M Star Shifter with cable and bracket for a 904. I would like to go from column to floor with my 66 Valiant Signet. Thank you...

Picked up a set of factory Rallye's over the weekend for my 66 from a really cool guy that drove over an hour to meet me half way. It was a really nice day here in Jersey, so I figured I would take the car to the lake and snap some pictures. Im really happy how the car transformed with a change...

Picked up a full factory set of original Rallye wheels for my 66 Valiant yesterday and are in great shape. The only issue is 2 of the trim rings seem to have in-bedded brake dust that the PO never cleaned. I can take my finger and feel the small deposits all over the trim ring. I tried soap and...

I'm interested in a set of wheels just for the rear of my 66 Valiant Signet. They are 15" x 8" with a 4 5/8" backspace 5 on 4 BP. Stock 7 1/4. Does anyone know if these will these will fit my car?

I ran into this video and would like to convert my 66 to this interior. Center console and buckets like this one. Maybe the Mopar nats next year will have the center console. Would anyone know if this console is just 66 Valiant only? If not what other cars did this come in? Would anyone have...

I have a 225. Has anyone used the PerTronix Ignitor® Solid-State Ignition Systems 1361A conversion kit? It's seems to be a good price at $79. Or is there a better conversion kit out there for about the same price. Also, should I go with a new coil?

Ok,.1966 Valiant, Slant 6, 904 trans, 7 1/4 Sure grip. Had the car for only 2 weeks. Something strange is happening. When I drive the car normally, it shifts fine and well, is fine. When at a stop light and on heavy acceleration something feels like it's slipping and sounds like banging. When...

I notice that the vacuum advance line from the carb (Carter 1bbl) always has vacuum. Unless I'm wrong and If I remember correctly, it should be ported vacuum not constant. Is this correct? If so, what could be the issue? There are no other ports on the carb to use.

I decided to tune up the 225 today at the shop. This was a little different than your adverage tune up. Started off with the basics, spark plugs, wires, points, condenser, cap, rotor, fuel filter. Then warmed it up to operating temp, popped the valve cover off and adjusted the valve lash. It...

Anyone have a 1966 VALIANT SIGNET EMBLEM for the passengers side fender they would like to sell? Thank you..

Does anyone know what color the trunk mat would be for a 1966 Valiant Signet? The original color of the car is gold. With that said, would the trunk mat be gold plaid? Or was it the gray plaid pattern?

I'm going to order Rallye wheels from wheels vintiques. Will a 14x7 4 1/2 BS wheel fit on the rear of my 66 Valiant Signet? I'd like to go with a 205/70/14 or 225/70/14 or a 235/60/14. Front would be a 14x6 with a 195/75/14. What do you guys think? Thank you...

Hi, we have a practically new 2006 Volvo Turbo Charger off a 2.5T, 5 cylinder that is an all in one unit. We were talking about it at the shop today and said we should put it in my 66 Valiant. Seems like it would be a fairly easy and clean looking install. My question is for you experienced...

What can be used to replace the kick panels on my 66 Valiant or are they available as reproduction. They are made out of some kind of particle board. Mine have been hacked by the PO to install speakers...yikes..!! Are they supposed to be plastic like these or do I have the originals? Mine are...