Search results for query: *

Sorry forgot to mention it's a 73 Scamp. Here is a pic of what I have.

I replaced a slant/904 combo for a 360 magnum/727. It is column shift. Is the shift linkage the same? It will not manually shift from park to 1st. The flat piece that connects the rod to the actual transmission shifter is hitting the case. I tried to bend it out, but ended up breaking it. Anyone...

I'm thinking of going with this one. http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=664&sb=0 Cam Style Hydraulic roller tappetBasic Operating RPM Range 900-5,200Intake Duration at 050 inch Lift 210Exhaust Duration at 050 inch Lift 220Duration at 050 inch Lift 210 int./220...

Thanks for the reply. I have camquest, but it confuses me even more. I guess my real question is what is the most lift I can get, with only a spring change. Most cam cards are based on 1.5 rockers, but I think the magnum heads have 1.6.

Thanks for the info it was a good read. I am just looking for the best setup with my combo. It is a street car, may take it down a 1/8th one day just to see what it will run. I am looking for more power between idle and 5000 rpm's.

Getting ready to buy a cam in the next few days, need some opinions. It will be a hydraulic roller. Car info 73 Scamp 360 Magnum stock internals Air Gap intake and Eddy 600 carb Hedman Headers and dual 2.5" exhaust 2200 stall converter in 727 3.91 gear 26" tires What will work best with at...

Thanks 2 Darts. After doing a little more thinking, I going to go with the 3.90 gears for now. If it is to much I will replace them later. Hopefully that will work better with that converter. What would be a good cam to run?

Will I notice that big of a difference between the 2.45 and 3.21? Will the converter be alright with a 3.21?

Thanks for the reply! To be completely honest I am cheap. I needed a converter to get the car on the road and a friend sold it to me for $50. I do plan on replacing the stock cam sometime this coming winter.

Car info 73 Scamp 360 Magnum stock internals Hedman Headers, Air Gap intake and Eddy 600 carb 2800 stall converter in 727 26" tires I have a 8 1/4 with 2.45 gears now I just pulled a 8 1/4 (27 spline) out of a dakota that is suregrip with 3.90 gear. I also have a set of 3.21 gears that I could...

Just had it done, $60 to cut and balance it.

Tomorrow is the day I am doing it! I still can not believe that no other gearheads have done this before. I guess I will be the test subject! We are going to bolt up the tranny first and take measurements off of my buddy's 340 Dart Sport. I will let you guys know how it goes. He is the redneck...

Cool I will do a search there.

I think you can use a car mount for the drivers side and a truck mount on the passenger side.

Btt. C'mon guys, I know someone has tried this.

I have a 73 spool mount so I don't think it will work. I think you can go that route on the 72 and older biscuit mount.

I really don't want to spend that kind of money for mounts. I have been out of work for almost a year so I am working on a budget.

good luck, hopefully it will check out ok

The car is a 73 Scamp with slant k frame. I am getting ready to put 360 magnum in soon. I am going to use the six k frame and move the mounting perches to fit. Has anyone done this? Any ideas would be great.

Welcome! Nice Dart

Great progress! Looks good

Welcome!:cheers:

I have a friend who is installing a 96' 318 magnum in a 82 Ram. How do you wire the new alternator to the older truck?

Looks good to me!

Welcome! Love that color.

I'm thinking 7.93!

Kevin welcome to this wonderful site. It's nice to have some fellow Tennessee boys on the site. You going to the Goodguys show @ Titans Stadium this weekend?

Welcome! That is a nice car you have.

Welcome! Those are some nice looking cars you have.

Here is my father-in-laws 65 Dart